CC3100: CE certify requirement on our configuration

Shuang Feng76

Part Number: CC3100

Hi,

Due to customer need to do CE certify on their product, CE-RED test needs to provide WiFi engineering prototype and fixed frequency operation instructions.

please provide the relevant WiFi specification information of the operation, please refer to the attachment for the recommended instructions for the engineering prototype.

Instruction for Preparing an Engineering Prototype.pdf

over 2 years ago

0 Seong Kim over 2 years ago

TI__Mastermind 34510 points

Hi Shuang,

Doesn't the WiFi engineering prototype refer to the customer's board?

Will the device's datasheet or NWP user's guide work for the WiFi spec info of operation?

The CC3100BOOST CE Test reports can also be downloaded here.

BR,

Seong

0 Shuang Feng76 over 2 years ago in reply to Seong Kim

TI__Intellectual 2990 points

Dear

Doesn't the WiFi engineering prototype refer to the customer's board?

Can you provide the procedure how to enter engineer mode to setting the WiFi channel power modulate type ect,If finnal board can not reach the requirement you can only provide the moudle to reach the requirement and give us detail procedure to enter engineer mode.

0 Seong Kim over 2 years ago in reply to Shuang Feng76

TI__Mastermind 34510 points

Hi Shuang,

The customer can use the CC3100/CC3200 Radio Tool GUI for certification testing.

The Radio Tool User's Guide is here.

BR,

Seong

Wi-Fi

Wi-Fi forum

CC3100: CE certify requirement on our configuration