This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC3200-LAUNCHXL: OTA example not working

Part Number: CC3200-LAUNCHXL
Other Parts Discussed in Thread: CC3200, UNIFLASH


I am using CC3200 LAUNCHXL board. I am trying to do OTA example given in the SDK. I am using

SDK - 1.5.0

CCS - 10.4.0

Service pack - CC3x00ServicePack-

Uniflash - uniflash_cc3xxx_setup_3.2.0.00123

I am following the example given in the CC3200_OTA_Update_Application_Note given in the docs folder of the SDK. 

I did the following step for Application_Bootloader.bin which is in pg 11.

After that I followed the steps given in pg 23 for dropbox

After that I am following the steps from pg 24 and 25.

I added the application_bootloader.bin in /sys/mcuimg.bin and ota_update_nonos.bin in /sys/mcuimg2.bin.

After that if I format the SFLASH with 1MB and then program the "servicepack_1.0.1.15-" in service pack programming. Then I click on program and the files get programmed to the board. Then if I remove the SOP 2 jumper and reset the board then nothing is printing in the terminal. The port is getting detected and I am able to open the port in the terminal but I am not getting any prints.

Please Help !

Thanks in advance Slight smile