Other Parts Discussed in Thread: , CC3220SF, CC3220S
How are you?
We are building a product with CC3235MODAS. It will be controlled by an host mcu by AT commands (firmware from SDK example at command with ti rtos). We bought the evaluation kit for development with the wrong part, CC3235MODASF. It is working great with the kit, but we need to store custom HTML pages inside it (not much, about 200Kb). Are doubt is if, without the 1Mb flash of CC3235MODASF, it will still be possible to put the AT commands firmware + custom HTML pages inside the CC3235MODAS? The HTML pages will not change and will not make changes to the AT commands firmware to increase its size.
Our understand is that the HTML pages will be store inside de 32Mbit serial flash inside CC3235MODAS. So, it will not be loaded from flash to RAM and executed there and we not need the 1Mb flash of CC3235MODASF. Also, we can use the development kit of CC3235MODASF, and the firmware wil work the same with CC3235MODAS.