TIDC-CC3200-VIDEO: Alternative to OV788

Shraddha Pande

Part Number: TIDC-CC3200-VIDEO
Other Parts Discussed in Thread: CC3200

Hello,

Need an opinion here.

I am trying to develop AV application like TI using CC3200 and OV788 module. But the modules used in TI designs OV788 and OV9732 are obsolete and I am not getting any support from Omnivision regarding alternate parts.

Can someone please help here to understand which parts can best suit here as an alternate? Has anyone used the parts with compatible TI drivers?

Appreciate your support here

Thank you.

over 2 years ago

0 Jessica M. Torres over 2 years ago

TI__Expert 5460 points

Hello Shraddha Pande,

We do have a Low-Power Wireless Camera Reference Design for Extended Battery Life that uses the OmniVision® Video Encoder OA7000. Let me know if that helps you.

Best Regards,

Jessica M. Torres

0 Shraddha Pande over 2 years ago in reply to Jessica M. Torres

Prodigy 60 points

Hi Jessica,

Thanks for your reply.

This was really helpful.

One more query, can you support me on the lens which is used in this design.

I am trying to connect to manufacturer reference given in the AN but could not find any results.

I want to check for cost details.

Thank you.

0 Jessica M. Torres over 2 years ago in reply to Shraddha Pande

TI__Expert 5460 points

Hi Shraddha,

I will look into it, and get back to you by the end of the week.

BR,

Jessica

0 Charles Oladimeji over 2 years ago in reply to Jessica M. Torres

TI__Mastermind 33805 points

Hi,

Please see link to the manufacturers website below. I recommend reaching out the them about cost details.

https://www.ytot.com/

the part number is listed below, you can share the link to the reference design with the sales person for reference.

YTW10085A01-HD+H59+IR0718

Regards,

Charles O

0 Jessica M. Torres over 2 years ago in reply to Shraddha Pande

TI__Expert 5460 points

Hi Shraddha

As Charles mentioned the lens used where a TW10085A01 model from https://www.ytot.com/. Although since these are just the focal lens of the design you can use another model for the design. The original design used the "YTW10085A01-HD+H59+IR0718" because it already had an integrated IR cut filter, which would be adjust with a 3.3v motor.