This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LAUNCHCC3235MOD: How to configure SOP pin

Part Number: LAUNCHCC3235MOD

According to the technical manual, P35 is SOP0, P34 is SOP1 and P21 is SOP2. However, syscfg in CCS does not show that P34,P35 has an external connection.

The customer would like to debug using the SWD2 line, how to deal with jumper to debug with SWD?

Could you please help check this? Thanks!

Best Regards,

Cherry Zhou