Hi Trond,
Could you help share the link of SDMA firmware link that you upgraded mentioned in below link? I run into the identical issue in IMX7D UART.
Thanks in advance!
Jun
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Trond,
Could you help share the link of SDMA firmware link that you upgraded mentioned in below link? I run into the identical issue in IMX7D UART.
Thanks in advance!
Jun
Hi Jacob,
Thanks for the comments. But the link is already resolved and no reply button is found. Already raise a question on NXP forum. But the reply does not explains why so much data is received in less than 1ms. The reply suggest to use hardware flow control, while CTS/RTS is used in this case already. So Trond's help is still expected.
Thanks!
Jun