CC3235MODSF: the value is '-233' (0xffffff17) ERROR

Hi Anil,

Is this a custom board or LaunchPad?

The link below is good reference for debugging JTAG connection issue.

https://software-dl.ti.com/ccs/esd/documents/ccsv7_debugging_jtag_connectivity_issues.html#invalid-data-read-back

Please also see related threads below:

1. https://e2e.ti.com/support/tools/code-composer-studio-group/ccs/f/code-composer-studio-forum/671298/compiler-error-code-the-value-is--233-0xffffff17-for-f28069-chip-via-jtag
2. https://e2e.ti.com/support/tools/code-composer-studio-group/ccs/f/code-composer-studio-forum/228782/sc_err_path_broken-233-error

BR,

Seong

Thank you..

Hi Seong Kim,

I am taking a custom Board, and SOP0-2 (010) pins with pullup and i have the small dought am taking the Free Rtos code with network terminal Demo and Syscnfg change pins to custom board GPIOs and execution through uniflash tool any effect on custom board. please suggest me 3.3V and GND showing 47ohms any short of IC. In what situations it will occur.

Hey Anil,

Please confirm if the device is in development or production mode. Production mode restricts the JTAG interface. More information on this can be found in the Uniflash User's Guide.

Has your board design been reviewed by us? If it hasn't been reviewed yet, please request one here.

BR,

Seong

For Development mode

Hi Anil,

Please request a design review from here.

Thanks and best regards,

Seong