This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC3130: Production test of CTS pin

Part Number: CC3130


I am designing test equipment for a PCB with a CC3130 and would like to verify that the CTS pin (pin 61) has been correctly soldered and that there are no solder balls shorting the pin.

Normally this pin will only go low if I "overload" the CC3130 with data on the UART. My software developer tells me this is not going to work.

Is there any other way to make the CC3130 toggle this pin to verify the soldering process ?