This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

WL1835MOD: RTTT automatically exits

Expert 3500 points
Part Number: WL1835MOD

Hi Champs,

My customer is testing the WL1835MOD at fixed frequency. The RTTT SW automatically exits after upgrading the FW.

Also when connected to the Wilink module, it shows no MAC and PHY FW version as in the picture.

Please advise.

Regards,

Kien Nguyen