• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 41 subscribers
  • Views 128 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC3235MODSF: Camera Peripheral

Daniel Nanto
Prodigy 250 points
Part Number: CC3235MODSF
Other Parts Discussed in Thread: SYSCONFIG, CC3200

Hello!

I was reading through the CC3235MODSF data sheet and saw the parallel camera sensor peripherals! I was wondering if anybody could point me in the direction of a starting point or module I could use to experiment with this feature. I saw somewhere that these drivers aren't supported now, is this true?

Thank you,

Dan

  • +1
    Guru 73325 points

    Hi Dan,

    Yes, that is correct. Internal camera peripheral is not supported by TI Drviers (and Sysconfig) at CC3220 and CC3235. TI is providing for this devices reference design with Omnivision camera module.

    If you want to use internal camera peripheral, you need to use driverlib layer. This can be done by similar way like at CC3200, because camera peripheral is same. For inspiration you can download older version of CC3200 SDK (version 1.40 or 1.30) where you find demo which uses camera interface via driverlib. Be aware that this demo is not comaptible with CC3235 devices.

    Jan