Other Parts Discussed in Thread: WL1835
We're putting our Linux based system with WL1835 BT/WiFI module through various EMC testing. We need to take control of Bluetooth transmitter for continuous and hopping transmission on various bands.
I've found and followed the advice at https://e2e.ti.com/support/wireless-connectivity/wi-fi-group/wifi/f/wi-fi-forum/124304/hcitool-commands-for-test-purposes with only intermittent success. It refers to a "WIKI" at http://processors.wiki.ti.com/index.php/Bluetooth_FCC_Mode#WL1271_.2B_ARM_Platforms but the link is broken.
We need more specific information about this test mode and the expected behaviour of hcitool: best advice seems to be to use a "vendor specific HCI command" with mnemonic "HCI_VS_DRPb_Tester_Packet_TX_RX". Is this documented anywhere for the WL1835? A search for "HCI_VS_DRPb_Tester_Packet_TX_RX" leads me to
Which might be of some use, if I can assume it also applies to the BT part of WL1835?
Thanks in advance for any help.