This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC3301: WIFI calibrator tool error

Part Number: CC3301

Hi All,

I have compiled the calibrator tool on my platform and trying to run calibrator tool.

Following is the firmware version-

[wlcore: Wireless Firmware Version 1.6.0.15
[wlcore: Wireless Phy Version 1.2.26.5.25.64

When I run following command and after that I am getting an error -

calibrator wlan0 plt power_mode on
command failed: Operation not supported (-95)

Please let me know solution about this.

Warm regards,

Sharadanand