• State TI Thinks Resolved
  • Locked Locked
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 41 subscribers
  • Views 283 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC3220S-LAUNCHXL: The CC3220S-LAUNCHXL device does not upload image files from Uniflash.

Seung-hyuk Choi
Prodigy 10 points

Part Number: CC3220S-LAUNCHXL
Other Parts Discussed in Thread: UNIFLASH

When I program an image for the radio tool in Uniflash, 
I get the error message :
"Operation failed: Error: SLImageCreator.exe: BootLoaderError, Timeout reading data." 
So, when I go into Uniflash's tools and select "Read CSR," 
I get this error message:
 "Error: Get CSR Error: Error: SLImageCreator.exe: BootLoaderError, Timeout reading data." 
How can I fix this?
  • 0
    TI__Expert 6155 points

    Hi,

    Can you explain the steps that led you to this error? Some images of what you did step by step would be nice in case you made a mistake and I can potentially point you in the right direction. As for CSR, I'm not sure what you did before selecting "Read CSR," but we have a Simplelink Academy that can guide you to successfully conduct a CSR request.

    Good luck, and I'll be here if you need additional assistance.

  • 0 in reply to BLiu
    Prodigy 10 points 
    Hello,

I used Uniflash to use the CC3220S-LAUNCHXL module with the Radio Tool.
First, I downloaded Uniflash version 9.3.0 and CC32XX/CC32XX Radio Tool v1.0.3.19. 
    When I programmed the C:\ti\CC3xxx_RadioTool_1.0.3.191\Device Images\CC3220S image\Programming.sli file with Uniflash, an error occurred.
I haven't tried any other methods. 

    I have two modules, and the image for one was loaded correctly and appears correctly in Radio Tool.
  • 0 in reply to Seung-hyuk Choi
    TI__Expert 6155 points

    Hi,

    Thank you for your clear directions. I'll run through programming the radio tool file with Uniflash and let you know what I get.

  • 0 in reply to Seung-hyuk Choi
    TI__Expert 6155 points

    Hi Seung,

    I am unable to reproduce your error. You said the following in your previous comment:

    Seung-hyuk Choi said:
    I have two modules, and the image for one was loaded correctly and appears correctly in Radio Tool.

    Is there a chance you can replicate the process that allowed the image to load correctly on one of the modules?

    Meanwhile, the following screenshots indicate what I did:

    After clicking program image, I got a notification that the programming worked successfully. By the way I am using Uniflash 8.2.