I am working on a project involving TI WL1835MOD WiFi+BT chip. We need to implement separate PCB antenna for WL1835MOD chip so we used TIDC-WL1835MODCOM8B module as a starting point. We retained completely the PCB design but without WL1835MOD chip. On place where antenna pins of
WL1835MOD were we put U.FL coaxial connectors which we use to connect to WL1835MOD placed on a separate board. As our device is intended for EU market we have to adhere to ETSI standards (get a CE mark for device).
Could we get ETSI/CE test report for TIDC-WL1835MODCOM8B in order to simplify certification process for our device?
Embedded++ - TI Design Network member