CC3200STK-WIFIMK: configure the senser tage cc3200stk on mobile

Khalid Al Naime

Part Number: CC3200STK-WIFIMK
Other Parts Discussed in Thread: CC3200STK, CC2650STK

Hi i have problem to configer my sensor tag cc3200stk-wifimk on my mobile . How can i activate and de activate the sensors?

over 5 years ago

0 made4engineering over 5 years ago

TI__Mastermind 27390 points

HI Khalid,

Please see ti.com/lit/pdf/SWRU509

-Aaron

0 Khalid Al Naime over 5 years ago in reply to made4engineering

Prodigy 80 points

i follow the instraction on page 8 but same result still i can not configure the CC3200STK sensortag

0 Benjamin Moore over 5 years ago in reply to Khalid Al Naime

TI__Mastermind 29085 points

Hi Khalid,

Can you elaborate on which specific step is not working and what you are seeing happen?

Thanks,
Ben M

0 Benjamin Moore over 5 years ago in reply to Benjamin Moore

TI__Mastermind 29085 points

Hi Khalid,

I haven't heard back from you in a while. I am going to close this thread because I assume that you have resolved your issue. If you need any further assistance, you can re-open the thread by posting a reply below. If the thread has locked, please open a new post by selecting the "Ask a related question" option.

Best Regards,
Ben M

0 Khalid Al Naime over 5 years ago in reply to Benjamin Moore

Prodigy 80 points

Hi,

Still no progress, today i have meeting with AUT IT team to check the connection issue, may be the MAC address of this sensor is not recognize to AUT.

I will let you . In addition, i need to download the data which i got it from sensor to my lap top, this is the major concern for me. I am using also CC2650STK sensor tag

Regards;

khalid

0 Khalid Al Naime over 5 years ago in reply to Khalid Al Naime

Prodigy 80 points

Hi Just the one member of AUT IT came to my lap and he requested to ask you what port you are using to cross the firewall? because i need to connect this sensor in Auckland university of Technology

0 Benjamin Moore over 5 years ago in reply to Khalid Al Naime

TI__Mastermind 29085 points

Port 80 is used for retrieving the sensor data locally from device's internal HTTP server. Port 1883 is used by the device when sending data to IBM quickstart.

Best,
Ben M

Wi-Fi

Wi-Fi forum

CC3200STK-WIFIMK: configure the senser tage cc3200stk on mobile