The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BOOSTXL-CC3120MOD: updating servicepack

Part Number: BOOSTXL-CC3120MOD
Other Parts Discussed in Thread: CC3120MOD, LAUNCHXL-CC26X2R1, CC31XXEMUBOOST


If I understand it well the CC3120MOD can be updated with new service pack by uart and by SPI. 

By SPI for example by XDS110 programmer ( I have LAUNCHXL-CC26X2R1 development board available).

By UART for example by CC31XXEMUBOOST evaluation board.

What is the simplest way to update a CC3120MOD chip at production level?

The uart connection is used as host controller interface.
SPI connection is not used functional.

Greetings Peter