CC3100MOD: Simplelink CC3100MOD - Access to information

cc3100moduser

Part Number: CC3100MOD
Other Parts Discussed in Thread: CC3100

In my application, before talking to a cloud service, i need to have access to the following data points:

- MAC Address of the Access Point

- RSSI of the Access Point

Could you please provide me with detailed code examples where and how i can addess this information?

Important here is, that i have access to this information AFTER the connection to the AP has already been established (sl_Connect)

Thank you

over 3 years ago

0 Michael Reymond over 3 years ago

TI__Mastermind 40965 points

Hi,

On the CC3100, the only method to get the information you need is before and during the AP connection, and not after the connection has been established. To get the MAC address, you will need to save the information provided by the wlan asynchronous event.

To get the RSSI of the access point, you will need to perform a scan before connection and save the measured RSSI value.

Please see my post here for more information: https://e2e.ti.com/support/wireless-connectivity/wifi/f/968/p/607182/2235332#2235332

Let me know if you need more clarification or have further questions on this topic.

Regards,

Michael

Wi-Fi

Wi-Fi forum

CC3100MOD: Simplelink CC3100MOD - Access to information