CCS/CC3100MODBOOST: How to programm CC3100MOD SimpleLink with a batch file?

Gildardo Lopez

Part Number: CC3100MODBOOST
Other Parts Discussed in Thread: UNIFLASH, CC3100MOD, CC3100, CC3200

Tool/software: Code Composer Studio

Regards

I'm programming the CC3100MOD SimpleLink via Uniflash 3.4.1(I'm using CC3x serial(UART) interface and the device Wifi c3100) ,but I need to program with a batch file for automated setup and production line purposes.

Someone could share an example for me.

Thanks

Gildardo

over 4 years ago

0 Michael Reymond over 4 years ago

TI__Mastermind 40965 points

Hi Gildardo,

There is a user's guide for using Uniflash to program a CC3100/CC3200 from the CLI that shows which commands to use for the CLI interface:

https://www.ti.com/lit/swru558

As for a batch file, I suggest you take a look at this E2E thread and try adapting the provided batch file for your use case:

https://e2e.ti.com/support/wireless-connectivity/wifi/f/968/t/597537?CC3200-CC3200-uniflash-command-line-programming-tool

Let me know if you need more clarification or have further questions on using Uniflash in a batch context.

Regards,

Michael

0 Gildardo Lopez over 4 years ago in reply to Michael Reymond

Prodigy 30 points

Thanks Michael for the support

The example was a great help. and resolved the issue.

I would like a programmatic way of knowing if the process has completed OK.There's some way to do this or by log files?

regards

Gildardo

0 Michael Reymond over 4 years ago in reply to Gildardo Lopez

TI__Mastermind 40965 points

Hi Gildardo,

You will likely need to parse through the output and ensure that only the success condition is returned for all of the operations you are performing with Uniflash.

In the example script there is checking of the errorlevel value, but that may or may not work depending on whether Uniflash consistently returns a non-zero error code when unexpected behavior is encountered.

Regards,

Michael

Wi-Fi

Wi-Fi forum

CCS/CC3100MODBOOST: How to programm CC3100MOD SimpleLink with a batch file?