The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BOOSTXL-CC3120MOD: Inquiries regarding MSP-EXP432P401R

Part Number: BOOSTXL-CC3120MOD
Other Parts Discussed in Thread: CC31XXEMUBOOST

Hi TI.

 

 

I bought the following products to develop the WIFI module.

====================

BOOSTXL-CC3120MOD

CC31XXEMUBOOST

MSP-EXP432P401R

====================

 

I have a question about the following operating conditions.

 

preparation.

LED EN(J3) and Power Select(J8(2-3)) setting in BOOSTXL-CC3120MOD.

 

1. USB Power supply to MSP-EXP432P401R

1.1 Connect BOOSTXL-CC3120MOD and MSP-EXP432P401R

1.2 USB Power supply to MSP-EXP432P401R

1.3 BOOSTXL-CC3120MOD check.

    Power LED is displayed.

    nHIB LED is displayed.

    Reset LED is displayed.

1.4 MSP-EXP432P401R check.

    Green LED is displayed.

    Red LED is blink.

1.5 Windows device manager check details.

========================

  Texas Instruments Debug Probes

    - XDS110 Class Data Port

    - XDS110 Class Data Probe

  PORT(COM & LPT)

    - XDS110 Class Application/User UART(COMxx)

    - XDS110 Class Auxiliary Data Port(COMxx)

========================

 

Q1. Is this the correct behavior?

Q2. Can you tell me how to check the log at this time?

Thank you in advance.

 

 

Regards,

Simon