Other Parts Discussed in Thread: CC31XXEMUBOOST
Hi TI.
I bought the following products to develop the WIFI module.
====================
BOOSTXL-CC3120MOD
CC31XXEMUBOOST
MSP-EXP432P401R
====================
I have a question about the following operating conditions.
preparation.
LED EN(J3) and Power Select(J8(2-3)) setting in BOOSTXL-CC3120MOD.
1. USB Power supply to MSP-EXP432P401R
1.1 Connect BOOSTXL-CC3120MOD and MSP-EXP432P401R
1.2 USB Power supply to MSP-EXP432P401R
1.3 BOOSTXL-CC3120MOD check.
Power LED is displayed.
nHIB LED is displayed.
Reset LED is displayed.
1.4 MSP-EXP432P401R check.
Green LED is displayed.
Red LED is blink.
1.5 Windows device manager check details.
========================
Texas Instruments Debug Probes
- XDS110 Class Data Port
- XDS110 Class Data Probe
PORT(COM & LPT)
- XDS110 Class Application/User UART(COMxx)
- XDS110 Class Auxiliary Data Port(COMxx)
========================
Q1. Is this the correct behavior?
Q2. Can you tell me how to check the log at this time?
Thank you in advance.
Regards,
Simon