CC3235MODSF: Configurations for NWP maintained after entering hibernate?

Choongbeom You

Part Number: CC3235MODSF

Hello,

I'm using "at_commands" example.

1. Configurations using "at+netcfgset", "at+wlanpolicyset" are maintained after "at+stop"?
If not, I have to re-configure those things after "at+start". Is it right?

2. If I do "at+stop" during connected to a AP then the connection will be lost. Is it right?

Thanks,

Calvin

over 3 years ago

0 Sarah P over 3 years ago

TI__Mastermind 38980 points

Hi Calvin,

Most options for NetCfgSet and WlanPolicySet are persistent, which means they are kept after reset (at+stop then at+start). You can find a complete list of API persistency settings in Appendix B of the NWP Programmer's Guide.
Yes, at+stop turns off the network processor, so it will no longer maintain a connection to an AP. If you have the fast or auto connection policy configured, the network processor will attempt to reconnect when it is started again.

Best regards,

Sarah

0 Choongbeom You over 3 years ago in reply to Sarah P

Expert 1490 points

Hi Sarah,

It's very helpful. Thank you.

Wi-Fi

Wi-Fi forum

CC3235MODSF: Configurations for NWP maintained after entering hibernate?