• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 40 subscribers
  • Views 126 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LAUNCHCC3235MOD: Power management circuit |

Brahim Salh
Intellectual 290 points
Part Number: LAUNCHCC3235MOD

Hi TI,

Could you please explain the difference between VBAT_CC, VCC_BRD, VCC_Buffer and VCC_LDO_3V3 in the Power Management circuit below?

Could you also please tell me where the jumpers J7, J8, J9 and J10 are located in the launchpad board?

BR,

Brahim

  • +1
    TI__Mastermind 28285 points

    VBAT_CC - Voltage going to the CC3235 device

    VCC_BRD - Voltage going to other devices or leds on the board

    VCC_Buffer - Voltage going to level shifter for UART comms

    VCC_LDO_3V3 - Voltage straight from LDO.

    Jumpers on located in the line of jumpers in the middle-ish part of the board/.