Is there any example code for using Real Time in Clock in CC3200 ?

Hi,

Can you take a look at the hib sample app?

Regards,
Gigi Joseph.

Hi, In Hib example it is said how to use Slow clock for wake up . But I need to implement like

"Cloud will sent time, I need to configure the time in CC3200 RTC " This RTC will be used for all timestamp in communication and storage

So I need two function like set_time( ) , get_time()

Thanks and That is what I expected but I have following query on RTC.
Qn:1)
void PRCMRTCInUseSet();

Mark the function of RTC as being used

This function marks in HW that feature to maintain calendar time in device is being used.

Specifically, this feature reserves user's HIB Register-1 accessed through PRCMOCRRegisterWrite(1) for internal work / purpose, therefore, the stated register is not available to user. Also, users must not excercise the Slow Clock Counter API(s), if RTC has been set for use.

The RTC feature, if set or marked, can be only reset either through reboot or power cycle.

Qn:2)
What are the API's I need to call for Initialising RTC, only RTC in use and setting time is enough?


Thanks,

Am using SDK1.0.0 in that it is not available ?

Hi I installed SDK1.1.0 I couldnt find anything about RTC there, My question is this , How to initialize RTC ?

Hi , Praneet Thanks, for your suggetsion .
That uses Middleware library .. I dnt want to use middleware library since I dnt need to add power management related which may increase the code size,

Qn 1)MAP_PRCMRTCSet will alone will Initialize the RTC right ? Or do I need to do any register settings to enable RTC.

Qn 2)Is it possible get interrupt from RTC at a particullar time say 10.00 AM every day like alarm ?

Excellent.
I'm closing this thread - Let me know if you need additional information on this/

-/Praneet