wl1271_sdio: probe of mmc1:0001:1 failed with error -16

user4544241

Other Parts Discussed in Thread: WL1835, WL1271

i build WL1835 Cape on BeagleBone with MainLine Kernel Debian Filesystem,and use am335x-boneblack-wl1831mod.dtb by default,but i get a error when boot up follow:

[ 3.969912] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
[ 3.976065] mmc1: new high speed SDIO card at address 0001
[ 8.114111] wl1271_sdio: probe of mmc1:0001:1 failed with error -16
[ 8.120531] wl1271_sdio: probe of mmc1:0001:2 failed with error -16

i don't know why?who can help me?

over 9 years ago

0 user4544241 over 9 years ago

Prodigy 40 points

i build WL1835 Cape on BeagleBone with MainLine Kernel Debian Filesystem,and i use am335x-boneblack-wl1831mod.dtb by default.but when i boot up get a error follow:

i don't know why?who can help me?

0 user4544241 over 9 years ago

Prodigy 40 points

i build WL1835 Cape on BeagleBone with MainLine Kernel Debian Filesystem,and use am335x-boneblack-wl1831mod.dtb by default,but iget a error when boot up follow:

i don't know why?who can help me?

0 Joseph Gigi over 9 years ago in reply to user4544241

TI__Guru* 85400 points

Hi,

Please refer to: processors.wiki.ti.com/.../WiLink8_Linux_Getting_Started_Guide

Regards,
Gigi Joseph.

0 Joseph Gigi over 9 years ago in reply to Joseph Gigi

TI__Guru* 85400 points

Hi,

Any update?

Regards,
Gigi Joseph.

Wi-Fi

Wi-Fi forum

wl1271_sdio: probe of mmc1:0001:1 failed with error -16