• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 39 subscribers
  • Views 889 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC3200 serial wifi problem

Banda Sriramasarma
Intellectual 345 points
Other Parts Discussed in Thread: CC3200

Hi

  1) I want to communicate between two/three different CC3200 launchpads.i think this example application is suitable for implementing  my application by refering this links

https://e2e.ti.com/support/wireless_connectivity/simplelink_wifi_cc31xx_cc32xx/f/968/t/398383 

https://e2e.ti.com/support/wireless_connectivity/simplelink_wifi_cc31xx_cc32xx/f/968/t/397194 

but i dont get exact serial wifi application output. i stucked at " ENTERED LOCAL CONTROL MODE" after this i gave like this      wlan_connect  (SSID name) 0 2 (PassWord). After this i dont get any thing ..how to solve this error.

2)and also how to select second device as access point .for serial WIFI example

3)and also for connecting multiple  cc3200 launchpads serial WIFI application is suitable OR TRANSCEIVER MODE  application is suitable.because i want to connect more CC3200 launchpads and create network .for this i refer this link .

https://e2e.ti.com/support/wireless_connectivity/simplelink_wifi_cc31xx_cc32xx/f/968/t/409978 

      How  to solve these....

Thanks and Regards,

B.Sriram Sarma.

  • 0
    TI__Expert 8255 points

    Hi Banda,

    Thanks for your post.  See below:

    1. Can you please attach a screenshot of what you are seeing.  I can try to replicate this by running the SDK on my machine once done.
    2. Both devices are configured as stations and connected via an AP.  So, neither device is run in AP mode.
    3. Yes, the mesh example you pointed out would allow you to connect multiple CC3200 LPs.  However, an alternative is described in this post:  

    Best,

    Austin