CC3200_CCS Uniflash

SRINIVASAN M

Prodigy 180 points

Other Parts Discussed in Thread: CC3200, UNIFLASH, CC3200SDK

Hi,

I have a problem in CC3200 during importing out_of_box experiment in CCS uniflash.

I have mentioned the link for out_of_box : C:\ti\CC3200SDK_1.1.0\cc3200-sdk\example\out_of_box\html\out_of_box.ucf

During this process an error occured (i.e) reading ACK signal failed

I have select Com Port number as 4 for my device, and also i have changed jumpers (SOP2).

over 8 years ago

0 David Bai over 8 years ago

TI__Intellectual 1835 points

Hi SRINIVASAN,

When you plug in the board, there will be two ports in "Computer Management --> Ports(CPM&LPT)", you should choose the second one, and then have a try.

0 SRINIVASAN M over 8 years ago in reply to David Bai

Prodigy 180 points

Hi David Bai,

I have checked with COM ports, port which i have select in "Device Manager" as mentioned below

0 David Bai over 8 years ago in reply to SRINIVASAN M

TI__Intellectual 1835 points

Hi SRINIVASAN,

Is there only one Dual Port in the Device Manager? Could you uninstall the FTDI driver and reinstall it again?

0 SRINIVASAN M over 8 years ago

Prodigy 180 points

Hi,
I have reinstall FTDI driver, that time also error occured during uniflash - programming (i.e) reading ACK signal failed

Wi-Fi

Wi-Fi forum

CC3200_CCS Uniflash