WL1835MOD: BT & BLE CE Receiver Blocking Testing

tang yunzhu

Prodigy 30 points

Part Number: WL1835MOD

Our product use the modular of WL1835MODGBMOCR/T, and is doing CE certificate testing.

Can you share us the method for the BT & BLE receiver blocking testing?

over 4 years ago

0 tang yunzhu over 4 years ago

Prodigy 30 points

We are using this modular on Linux OS.

0 Rizwan Murji over 4 years ago in reply to tang yunzhu

TI__Genius 12260 points

Hi Tang,

I hope all is well. I would suggest that you look at our CE reports on-line. You can then go to the WL18MODGB, CE folder. Here you will find the BT test report and within here you will find the setup used for the testing. You can use the first link (download button) from below to get the reports

www.ti.com/.../WL18XX-CERTIFICATION

I hope this helps,

Thanks,

Riz

0 tang yunzhu over 4 years ago in reply to Rizwan Murji

Prodigy 30 points

Hi Riz

Can you help to check wether WL1835MOD firmware version have been any updated?

Our test house confirmed we can use WL1835MOD's some data, but we need to check wheter the modular's firmware version is same with the one when certificate.

0 Rizwan Murji over 4 years ago in reply to tang yunzhu

TI__Genius 12260 points

Hi Tang,

There have been no updates to the FW that would effect the radio PHY version. What we originally certified with should still be valid. You need to ensure that you are using the WL1835MOD_C2PC.INI file however.

Thanks,

Riz

Wi-Fi

Wi-Fi forum

WL1835MOD: BT & BLE CE Receiver Blocking Testing