CC3200SDK：When the Apple phone is connected to the AP, the password is correct but the error is incorrect.

Hi,

The SDK provides an API that allows you to Scan the air and look for APs (see scan policy and sl_WlanGetNetworkList).

When you wants to connect to the AP, you must provide the AP name (SSID) and its credentials (password) using the sl_WlanConnect (or sl_WlanProfileAdd).

The NWP will automatically enter the password when needed.

Br,

Kobi

Is there an interface on the AP side to detect that STA is ready to connect to the current AP?The current project is in AP mode. The client connects with the mobile phone. Can the AP terminal detect the connection information before determining the password?

Is there an interface on the AP side that can detect that STA is ready to connect to the current AP?The current project is in AP mode. The client connects with the mobile phone. Can the AP terminal detect the connection information before determining the password?

What exactly are you trying to achieve?

The WPA password is a fixed attribute of the AP so it can't be changed per station.

Theoretically you can implement the AP on the host using the transceiver API and change the logic, but this would be very complicated.

If you want to identify and verify clients (stations) you can do so after they are connected.

Br,

Kobi

When STA is ready to connect to AP, enter the password before judging the accuracy of SSID and password.Is there an interface or flag bit in the ap-end SDK that identifies the state that STA is ready to access?Or is there any way to see the status?

If I understand  correctly you want to dynamically change the connection password for each station that connects to the AP.

There is no such interface.

Br,

Kobi

STA enters the password to connect to the AP process, because the connection fails due to an exception (for example, the AP signal disappears), is there a function or flag bit on the AP side that can indicate the status of the abnormal connection failure?