This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

CC3100MOD: CC3100MOD

Prodigy 20 points

Replies: 2

Views: 29

Part Number: CC3100MOD

Hi, is it okay if I clean the item with water after soldering? And dry by compressed air, or may be damage? Thanks:)

  • Victoria,

    Use can use either distilled or deionized water as an alternative cleaning fluid since these are very poor conductors. Note that it will take longer to dry. 

    BR,

    Seong

     

  • In reply to Seong Kim:

    Thank you so much. Usually after cleanup I dry pcbs in drying cabinet with 50-60C degree

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.