This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC3235MODASF: inquiry about entering the bootloader.

Part Number: CC3235MODASF

hi

https://www.ti.com/lit/an/swpa231/swpa231.pdf?ts=1607331975126&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FCC3235MODSF%253FkeyMatch%253DCC3235MODSF%2526tisearch%253DSearch-EN-everything%2526usecase%253DGPN

 Looking at the above document, SOP1 must be pulled up to enter the bootloader,

I understood that the module must recognize the break signal to enter the bootloader mode.

is it corrent?

Can you provide examples of break signal transmission and  communication with bootloader?

thanks.

regards,