This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

6LBR border router unstable with CC2650 Sensortag

Prodigy 180 points

Replies: 65

Views: 11329

I have just started developing with CC2650 Sensortag and I have a Raspberry pi + cc2531 dongle up and running as a 6lbr border router. 

When I flash the sensortags with cc26xx-demo or cc26xx-web-demo they do NOT appear under the 'sensors' tab in 6lbr. A few times the cc26xx-demo has appeared briefly just to dissapear again, but the web-demo never works. However, they seem to be connected to the router, since when I under the 'RPL' tab click "trigger global repair", they start to flash the red and green LEDs. 

I have no idea where to start. Is the problem in 6lbr border router or in the cc26xx Contiki? 

I'm so confused. Please ask me relevant questions about my setup and help me find the problem.

Thank you!

65 Replies

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.