CC2530: how can i achieve this condition that says in datasheet?

I'm using one of zstack 3.0.0 project  . sample light I think

what should I do beside power saving define to.reach power mode 2 ?

When you see this power consumption, does your CC2530 join any Zigbee network? If yes, what is polling rate of your device?

yes when its not connected to any network and try to connect , it draw .5 to 8 mA but when it connected to network it draw 120 microamp to 250 microamp and sometimes 1.2 mA

/****************************************
 * The following are for End Devices only
 ***************************************/

-DRFD_RCVC_ALWAYS_ON=FALSE

/* The number of milliseconds to wait between data request polls to the coordinator. */
-DPOLL_RATE=1000

/* This is used after receiving a data indication to poll immediately
 * for queued messages...in milliseconds.
 */
-DQUEUED_POLL_RATE=100

/* This is used after receiving a data confirmation to poll immediately
 * for response messages...in milliseconds
 */
-DRESPONSE_POLL_RATE=100

/* This is used as an alternate response poll rate only for rejoin request.
 * This rate is determined by the response time of the parent that the device
 * is trying to join.
 */
-DREJOIN_POLL_RATE=440

/* Rejoin retry backoff silent period timer duration in milliseconds - default 15 minutes according to HA test spec */
-DREJOIN_BACKOFF=900000

/* Rejoin retry backoff scan timer duration in milliseconds - default 15 minutes according to HA test spec */
-DREJOIN_SCAN=900000

/* Latest sample apps use LED4 and do not use S1 switch */
-DENABLE_LED4_DISABLE_S1

i did it but no change

i think maybe there is task 

how can check what task is running or what task in queue

in keil, it is so easy but i don't know how to do it in iar

You can refer to AN079 to use scope to measure power consumption with scope. Take queue is tasksEvents in osal_run_system() of osal.c.

i check osal_run_system() and when its drawing 120 microamp it still trigger osal_run_system()
its idx variable is 0x01
its events = tasksEvents[idx] = 1
what should i check now?how can fine out which one of task is running?

in osalInitTasks task one is macTaskInit . is it the one thats running ?

what should i do with it>?

Do you create periodic event in your application to process anything?

zstack 3.0.0

sample light

I couldn't solve it yet

i did it

Tue Mar 27, 2018 09:43:16: [OSAL.c:1561.9] #29 
Tue Mar 27, 2018 09:43:16: [OSAL.c:1561.9] #30 
Tue Mar 27, 2018 09:43:16: [OSAL.c:1561.9] #31 
Tue Mar 27, 2018 09:43:16: [OSAL.c:1561.9] #32 
Tue Mar 27, 2018 09:43:16: [OSAL.c:1561.9] #33 
Tue Mar 27, 2018 09:43:16: [OSAL_PwrMgr.c:237.3] #1 
Tue Mar 27, 2018 09:44:16: [OSAL.c:1561.9] #34 
Tue Mar 27, 2018 09:44:16: [OSAL.c:1561.9] #35 
Tue Mar 27, 2018 09:44:16: [OSAL.c:1561.9] #36 
Tue Mar 27, 2018 09:44:16: [OSAL.c:1561.9] #37 
Tue Mar 27, 2018 09:44:16: [OSAL.c:1561.9] #38 
Tue Mar 27, 2018 09:44:16: [OSAL_PwrMgr.c:237.3] #2 
Tue Mar 27, 2018 09:45:16: [OSAL.c:1561.9] #39 
Tue Mar 27, 2018 09:45:16: [OSAL.c:1561.9] #40 
Tue Mar 27, 2018 09:45:16: [OSAL.c:1561.9] #41 
Tue Mar 27, 2018 09:45:16: [OSAL.c:1561.9] #42 
Tue Mar 27, 2018 09:45:16: [OSAL.c:1561.9] #43 
Tue Mar 27, 2018 09:45:16: [OSAL_PwrMgr.c:237.3] #3 
Tue Mar 27, 2018 09:46:16: [OSAL.c:1561.9] #44 
Tue Mar 27, 2018 09:46:16: [OSAL.c:1561.9] #45 
Tue Mar 27, 2018 09:46:16: [OSAL.c:1561.9] #46 
Tue Mar 27, 2018 09:46:16: [OSAL.c:1561.9] #47 
Tue Mar 27, 2018 09:46:16: [OSAL.c:1561.9] #48 
Tue Mar 27, 2018 09:46:16: [OSAL_PwrMgr.c:237.3] #4 

as you can see there is five osal_run_system call before osal_pwrmgr_powerconserve so there is 5 event each second that draw current how can i find out which task it is?

my pulling rate is 60 second

help me find out which task is doing that please