CCS/CC2538: CC2538 update device command

Alvin Chen

Part Number: CC2538
Other Parts Discussed in Thread: Z-STACK

Tool/software: Code Composer Studio

Hi Team，

My customer use Z-stack 3.0.1 to test ZDO_UpdateDeviceIndication().

When ZED leave network by bdb_resetLocalAction(), ZR send update device command. But ZC don't trigger ZDO_UpdateDeviceIndication().

My customer will provide sniffer files and more details.

Thanks for your help.

over 6 years ago

0 Jesse Huang over 6 years ago

Intellectual 780 points

This is the captured packet(using Wireshark)：

8103.capture.rar

0 Toby over 6 years ago

TI__Mastermind 35030 points

Hi,

After the coordinator receives that command from the router, the coordinator would call ZDApp_ProcessSecMsg. It will handle the update device command in the ZDO_UPDATE_DEVICE_IND case in ZDApp_ProcessSecMsg. Then you can add code in that case to call ZDO_UpdateDeviceIndication.

Regards,
Toby

Zigbee & Thread

Zigbee & Thread forum

CCS/CC2538: CC2538 update device command