CCS/CC2538: Debugging on USB based board - (No XDS100 emulator or JTAG)

Ahed A.

Prodigy 50 points

Part Number: CC2538
Other Parts Discussed in Thread: SEGGER

Tool/software: Code Composer Studio

Hi,

I hope I am in the right place.

I have "OpenMote-CC2538 Rev. A1" device with CC2538SF23. This device includes OpenUSB board.

Is there a possible way that allows CCD to debug a project using the USB port (not FTDI emulator)?

Ahed

over 4 years ago

0 PM over 4 years ago

TI__Mastermind 27145 points

Hi,

I sent it to a concerned engineer. We will get back to you ASAP. Please bear with us.

Thanks,

0 YiKai Chen over 4 years ago

Guru 735455 points

As I know, you need debugger to debug OpenMote-CC2538

0 Ahed A. over 4 years ago in reply to YiKai Chen

Prodigy 50 points

Thank you very much. It is true, openmote-cc2538 Rev.A1 needs an external debugger such as the Segger J-Link. Or this is how openmote support replays to my email, asking about debugging.

Sorry for my late response.

Zigbee & Thread

Zigbee & Thread forum

CCS/CC2538: Debugging on USB based board - (No XDS100 emulator or JTAG)