LAUNCHXL-CC1352P: Device resets to default image after reboot

Deepanraj Anbarasan

Expert 1140 points

Part Number: LAUNCHXL-CC1352P
Other Parts Discussed in Thread: SIMPLELINK-CC13X2-26X2-SDK

Hi,

I am using CC1352P-2 lauchpad, Whenever we flash zr_switch_oad binary along with bim off chip binary.

It functions properly, But as we reset the board loads with project zero binary automatically.

I am debugging this issue for days and i am not able to come to one conclusion.

Please help us solve this issue

Thank you,

Deepanraj

over 4 years ago

0 Ryan Brown1 over 4 years ago

TI__Guru**** 202106 points

Hi Deepanraj,

Make sure you are programming the *_oad.bin file which has the correct CRC and flag settings to be used by the BIM, and do not overwrite the BIM application while programming.

http://dev.ti.com/tirex/content/simplelink_cc13x2_26x2_sdk_3_40_00_02/docs/zigbee/html/zigbee/ota_upgrade.html#ota-client-application-binary-usage
http://dev.ti.com/tirex/explore/node?node=AEqcPWTnjZzNP55sGIIbZw__pTTHBmu__LATEST

If this does not help them please provide the SIMPLELINK-CC13X2-26X2-SDK version, example projects/build settings, and flash tool process required to replicate the behavior.

Regards,
Ryan

Zigbee & Thread

Zigbee & Thread forum

LAUNCHXL-CC1352P: Device resets to default image after reboot