CC1352P: How to set dynamic channel for the CC1352P ZNP device?

Hello Ryan Brown1,

I have already refer this document & APP_CNF_BDB_SET_CHANNEL  request.

I would like to share more about it.

if you see the APP_CNF_BDB_SET_CHANNEL discription, We are able to set the dedicated channel we want. (from channel 11 to 26).

But for our need, 

ZNP must look over the network and dynamicaly assign the available channel to it self. 

Note : 

For CC2538 there is a DDEFAULT_CHANLIST  paramater in the f8wConfig.cfg file.

We achive this by setting the DDEFAULT_CHANLIST = 0x07FFF800

I would like to set same functionalty for the CC1352P ZNP Device Will you please help me to know,

How can I do this?

Regards,

Shiv Patil.

Hello Ryan Brown1,

As per you suggestion I have made changes in the sys.config.

Selected all channels for the primary & secondary channel list.

Still the CC1352P ZNP device set on 0x0B default channel.

Please refer follwoing img for more info.

Will you please help me to know how the ZNP device will be configure to choose any avilable channel while 0x0B is used by other device in network?

Regards,

Shiv Patil.

Hello YiKai Chen,

As per your suggestion I have polluted the channel 11 & now the device is configured on the channel 12 i.e 0x0C.

Thanks Ryan Brown1 & YiKai Chen.

Regards,

Shiv Patil.