This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC1352P: Zigbee3.0 Linux Sensor to Cloud - No UART Signal Over Beaglebone USB Host

Part Number: CC1352P

I am following the SimpleLink Academy to run the zigbee3.0 Linux Sensor to Cloud demo on BB Black. After compiling the program and running the script zigbeeHAgw(CC1352 LaunchPad as ZNP), the gateway got an SRSP Cond Wait timed out error. I used an oscilloscope to probe the UART RX pin on LaunchPad and found out there is no signal on that pin, which means no command is sent out from the BB Black USB host.

To compare, I used the same LaunchPad to test on an x86 PC running Ubuntu. The gateway is running fine on Ubuntu and this time I can see some commands sent from PC's USB to LaunchPad, so I'm assuming the cause of the problem is on BB Black side.

What could be the cause of this issue? I also tried to modify the NPI_Gateway.cfg by changing the device path from ttyO4 to ttyACM0, but with no luck. I'm not sure why the default path is ttyO4? In my understanding, ttyO4 is the UART4 on beaglebone header, not USB host.

Please find the error information as below:

---------------------------------------------

debian@beaglebone:~/source$ cd ~/source/out/Precompiled/servers
debian@beaglebone:~/source/out/Precompiled/servers$ sudo ./zigbeeHAgw
Platform type selected automatically as bbb.
To override this selection, please stop this script, and then run it again,
specifying the desired platform type at the command line:
  ./zigbeeHAgw [help | bbb | x86 ]

running ./zigbeeHAgw on an ARM
done processing arguments, board type bbb, target arm
NPI                 is 'NPI_lnx_arm_server'
Zstack linux server is 'ZLSZNP_arm'
gateway server      is 'GATEWAY_SRVR_arm'
network manager     is 'NWKMGR_SRVR_arm'
OTA server        is 'OTA_SRVR_arm'
Starting the ZigBee gateway subsystem
making sure there are no lingering servers...
there are 0 NPI servers
there are 0 ZLS servers
there are 0 GATEWAY servers
there are 0 NWKMGR servers
there are 0 OTA servers
(total 0)
done
Executing reset from external scripts
===================================================
starting NPI, cmd ' ./NPI_lnx_arm_server NPI_Gateway.cfg -v 0x0000010E ' on Sun                                                                                                              Jul 26 07:48:58 UTC 2020
[07:48:58.704,572] [NPISRVR/MAIN] UNMSKBL:
[07:48:58.708,510] [NPISRVR/MAIN] UNMSKBL:  ************************************                                                                                                             ************
[07:48:58.708,547] [NPISRVR/MAIN] UNMSKBL:  *  NPI Server v1.0.2d                                                                                                                                       *
[07:48:58.708,570] [NPISRVR/MAIN] UNMSKBL:  ************************************                                                                                                             ************
[07:48:58.708,592] [NPISRVR/MAIN] UNMSKBL:
Startup phase 1 completed successfully, server started (NPI_PID=3105) on Sun Jul                                                                                                              26 07:49:03 UTC 2020
===================================================
starting ZLSZNP, cmd ' ./ZLSZNP_arm 127.0.0.1:2533 config.ini -v 0x0000460E ' on                                                                                                              Sun Jul 26 07:49:03 UTC 2020
[07:49:03.956,066] [Z_STACK/MAIN] UNMSKBL:
[07:49:03.959,473] [Z_STACK/MAIN] UNMSKBL:  ************************************                                                                                                             ************
[07:49:03.960,436] [Z_STACK/MAIN] UNMSKBL:  *  ZStack Server for ZNP v1.0.2d                                                                                                                            *
[07:49:03.961,527] [Z_STACK/MAIN] UNMSKBL:  ************************************                                                                                                             ************
[07:49:03.962,163] [Z_STACK/MAIN] UNMSKBL:
[07:49:03.965,074] [Z_STACK/MAIN] PKTTYPE: [         NPISRVR<<Z_STACK                                                                                                                                        ] [AREQ] 08:5F:00:02:5A:5F:53:54:41:43:4B
[07:49:03.966,841] [NPISRVR/MAIN] PKT_HEX: New incoming connection from client Z                                                                                                             _STACK (connection # 5)
[07:49:03.970,040] [Z_STACK/MAIN] PKTTYPE: [         NPISRVR<<Z_STACK                                                                                                                                        ] [SREQ] 02:25:3E:FF:FF
[07:49:03.972,987] [NPISRVR/MAIN] PKT_HEX: [SOCZIGB<<NPISRVR                                                                                                                                                 ] [send] 02:25:3E:FF:FF
ERR:: Input/output error
[ERR] npi_ipc_errno 0x02030100
Exit socket while loop
[07:49:05.979,918] [Z_STACK/MAIN] ERROR  : SRSP Cond Wait timed out!
[07:49:05.980,327] [Z_STACK/MAIN] ERROR  : apicSendSynchData() failed getting re                                                                                                             sponse
[07:49:05.980,477] [Z_STACK/MAIN] PKTTYPE: [         NPISRVR<<Z_STACK                                                                                                                                        ] [SREQ] 01:2F:09:00
[07:49:07.981,368] [Z_STACK/MAIN] ERROR  : SRSP Cond Wait timed out!
[07:49:07.981,775] [Z_STACK/MAIN] ERROR  : apicSendSynchData() failed getting re                                                                                                             sponse
[07:49:07.981,928] [Z_STACK/MAIN] PKTTYPE: [         NPISRVR<<Z_STACK                                                                                                                                        ] [SREQ] 01:2F:06:00
Startup phase 2 failed
NPI_lnx_arm_server: no process found
waiting for NPI to exit
making sure there are no lingering servers...
there are 0 NPI servers
there are 0 ZLS servers
there are 0 GATEWAY servers
there are 0 NWKMGR servers
there are 0 OTA servers
(total 0)
done
Executing reset from external scripts
===================================================
starting NPI, cmd ' ./NPI_lnx_arm_server NPI_Gateway.cfg -v 0x0000010E ' on Sun                                                                                                              Jul 26 07:49:12 UTC 2020
[07:49:12.532,248] [NPISRVR/MAIN] UNMSKBL:
[07:49:12.534,016] [NPISRVR/MAIN] UNMSKBL:  ************************************                                                                                                             ************
[07:49:12.534,116] [NPISRVR/MAIN] UNMSKBL:  *  NPI Server v1.0.2d                                                                                                                                       *
[07:49:12.534,146] [NPISRVR/MAIN] UNMSKBL:  ************************************                                                                                                             ************
[07:49:12.534,169] [NPISRVR/MAIN] UNMSKBL:
^Ccaught SIGTERM, killing all the servers and cleaning up
making sure there are no lingering servers...
there are 1 NPI servers
there are 0 ZLS servers
there are 0 GATEWAY servers
there are 0 NWKMGR servers
there are 0 OTA servers
(total 1)
there are 1 NPI servers
there are 0 ZLS servers
there are 0 GATEWAY servers
there are 0 NWKMGR servers
there are 0 OTA servers
(total 1)
there are 1 NPI servers
there are 0 ZLS servers
there are 0 GATEWAY servers
there are 0 NWKMGR servers
there are 0 OTA servers
(total 1)
there are 1 NPI servers
there are 0 ZLS servers
there are 0 GATEWAY servers
there are 0 NWKMGR servers
there are 0 OTA servers
(total 1)
there are 0 NPI servers
there are 0 ZLS servers
there are 0 GATEWAY servers
there are 0 NWKMGR servers
there are 0 OTA servers
(total 0)
done
terminating zigbeeHAGW (pid 3063)
Killed
debian@beaglebone:~/source/out/Precompiled/servers$

The complete building log is as followed:

debian@beaglebone:~/source$ sudo dos2unix setup.sh
dos2unix: converting file setup.sh to Unix format...
debian@beaglebone:~/source$ sudo chmod +x setup.sh
debian@beaglebone:~/source$ sudo ./setup.sh
******************* BEGIN SETUP! ********************
This setup script will:
  - make all necessary scripts executable
  - ensure necessary files have UNIX line endings
  - remove prebuilt directories
  - install Node Modules for Node.js Zigbee Gateway
  - build Linux Zigbee Gateway
  - extract Linux Zigbee Gateway binaries
*****************************************************
Entered /Projets/node Directory

Make the gateway scripts executable

SUCCESS - gateway scripts executable
/home/debian/source

Remove ERROR__out or out Directory if present

rm: cannot remove 'ERROR__out/': No such file or directory
Removed Previous built package.

Convert all files from dos2unix

dos2unix: converting file ./setup.sh to Unix format...
dos2unix: converting file ./Components/mt/MT_RPC.h to Unix format...
dos2unix: converting file ./Components/mt/MT.h to Unix format...
dos2unix: converting file ./Components/stack/sec/ssp.h to Unix format...
dos2unix: converting file ./Components/stack/sys/ZGlobals.h to Unix format...
dos2unix: converting file ./Components/stack/zcl/zcl_lighting.h to Unix format..                                                                                                             .
dos2unix: converting file ./Components/stack/zcl/zcl_ss.h to Unix format...
dos2unix: converting file ./Components/stack/zcl/zcl_green_power.c to Unix forma                                                                                                             t...
dos2unix: converting file ./Components/stack/zcl/zcl_ezmode.h to Unix format...
dos2unix: converting file ./Components/stack/zcl/zcl.h to Unix format...
dos2unix: converting file ./Components/stack/zcl/zcl_green_power.h to Unix forma                                                                                                             t...
dos2unix: converting file ./Components/stack/zcl/zcl_hvac.h to Unix format...
dos2unix: converting file ./Components/stack/zcl/zcl.c to Unix format...
dos2unix: converting file ./Components/stack/zcl/zcl_general.h to Unix format...
dos2unix: converting file ./Components/stack/zcl/zcl_hvac.c to Unix format...
dos2unix: converting file ./Components/stack/zcl/zcl_poll_control.h to Unix form                                                                                                             at...
dos2unix: converting file ./Components/stack/zcl/zcl_general.c to Unix format...
dos2unix: converting file ./Components/stack/zcl/zcl_ss.c to Unix format...
dos2unix: converting file ./Components/stack/zcl/zcl_poll_control.c to Unix form                                                                                                             at...
dos2unix: converting file ./Components/stack/zcl/zcl_closures.h to Unix format..                                                                                                             .
dos2unix: converting file ./Components/stack/zcl/zcl_lighting.c to Unix format..                                                                                                             .
dos2unix: converting file ./Components/stack/zcl/zcl_closures.c to Unix format..                                                                                                             .
dos2unix: converting file ./Components/stack/zdo/ZDObject.h to Unix format...
dos2unix: converting file ./Components/stack/zdo/ZDConfig.h to Unix format...
dos2unix: converting file ./Components/stack/zdo/ZDSecMgr.h to Unix format...
dos2unix: converting file ./Components/stack/zdo/ZDApp.h to Unix format...
dos2unix: converting file ./Components/stack/zdo/ZDProfile.h to Unix format...
dos2unix: converting file ./Components/stack/nwk/NLMEDE.h to Unix format...
dos2unix: converting file ./Components/stack/nwk/reflecttrack.h to Unix format..                                                                                                             .
dos2unix: converting file ./Components/stack/nwk/aps_groups.h to Unix format...
dos2unix: converting file ./Components/stack/nwk/stub_aps.h to Unix format...
dos2unix: converting file ./Components/stack/nwk/APSMEDE.h to Unix format...
dos2unix: converting file ./Components/stack/nwk/APS.h to Unix format...
dos2unix: converting file ./Components/stack/nwk/AssocList.h to Unix format...
dos2unix: converting file ./Components/stack/nwk/nwk.h to Unix format...
dos2unix: converting file ./Components/stack/nwk/BindingTable.h to Unix format..                                                                                                             .
dos2unix: converting file ./Components/stack/nwk/nwk_globals.h to Unix format...
dos2unix: converting file ./Components/stack/nwk/nwk_util.h to Unix format...
dos2unix: converting file ./Components/stack/nwk/rtg.h to Unix format...
dos2unix: converting file ./Components/stack/nwk/nwk_bufs.h to Unix format...
dos2unix: converting file ./Components/stack/gp/gp_common.h to Unix format...
dos2unix: converting file ./Components/stack/gp/gp_proxyTbl.c to Unix format...
dos2unix: converting file ./Components/stack/gp/gp_interface.h to Unix format...
dos2unix: converting file ./Components/stack/gp/cGP_stub.h to Unix format...
dos2unix: converting file ./Components/stack/gp/gp_common.c to Unix format...
dos2unix: converting file ./Components/stack/gp/dGP_stub.h to Unix format...
dos2unix: converting file ./Components/stack/af/AF.h to Unix format...
dos2unix: converting file ./Components/services/saddr/saddr.h to Unix format...
dos2unix: converting file ./Components/services/saddr/saddr.c to Unix format...
dos2unix: converting file ./Components/zmac/ZMAC.h to Unix format...
dos2unix: converting file ./Components/mac/include/mac_api.h to Unix format...
dos2unix: converting file ./Components/hal/include/hal_board.h to Unix format...
dos2unix: converting file ./Components/hal/include/hal_drivers.h to Unix format.                                                                                                             ..
dos2unix: converting file ./Components/hal/include/hal_key.h to Unix format...
dos2unix: converting file ./Components/hal/include/hal_led.h to Unix format...
dos2unix: converting file ./Components/hal/include/hal_timer.h to Unix format...
dos2unix: converting file ./Components/hal/include/hal_uart.h to Unix format...
dos2unix: converting file ./build_all to Unix format...
dos2unix: converting file ./scripts/package_builder to Unix format...
dos2unix: converting file ./Projects/zstack/linux/srvwrapper/trace.c to Unix for                                                                                                             mat...
dos2unix: converting file ./Projects/zstack/linux/srvwrapper/api_server.c to Uni                                                                                                             x format...
dos2unix: converting file ./Projects/zstack/linux/srvwrapper/configparser.c to U                                                                                                             nix format...
dos2unix: converting file ./Projects/zstack/linux/srvwrapper/api_client.h to Uni                                                                                                             x format...
dos2unix: converting file ./Projects/zstack/linux/srvwrapper/trace.h to Unix for                                                                                                             mat...
dos2unix: converting file ./Projects/zstack/linux/srvwrapper/api_lnx_ipc_rpc.h t                                                                                                             o Unix format...
dos2unix: converting file ./Projects/zstack/linux/srvwrapper/hal_rpc.h to Unix f                                                                                                             ormat...
dos2unix: converting file ./Projects/zstack/linux/srvwrapper/configparser.h to U                                                                                                             nix format...
dos2unix: converting file ./Projects/zstack/linux/srvwrapper/api_server.h to Uni                                                                                                             x format...
dos2unix: converting file ./Projects/zstack/linux/srvwrapper/main.c to Unix form                                                                                                             at...
dos2unix: converting file ./Projects/zstack/linux/srvwrapper/api_client.c to Uni                                                                                                             x format...
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/usbreset/project/usbreset                                                                                                             .bin
dos2unix: converting file ./Projects/zstack/linux/usbreset/project/makefile to U                                                                                                             nix format...
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/usbreset/project/out/usbr                                                                                                             eset.o
dos2unix: converting file ./Projects/zstack/linux/usbreset/source/usbreset.c to                                                                                                              Unix format...
dos2unix: converting file ./Projects/zstack/linux/demo/framework/polling.c to Un                                                                                                             ix format...
dos2unix: converting file ./Projects/zstack/linux/demo/framework/polling.h to Un                                                                                                             ix format...
dos2unix: converting file ./Projects/zstack/linux/demo/framework/data_structures                                                                                                             .h to Unix format...
dos2unix: converting file ./Projects/zstack/linux/demo/framework/user_interface.                                                                                                             c to Unix format...
dos2unix: converting file ./Projects/zstack/linux/demo/framework/user_interface.                                                                                                             h to Unix format...
dos2unix: converting file ./Projects/zstack/linux/demo/framework/tcp_client.c to                                                                                                              Unix format...
dos2unix: converting file ./Projects/zstack/linux/demo/framework/data_structures                                                                                                             .c to Unix format...
dos2unix: converting file ./Projects/zstack/linux/demo/framework/macros.c to Uni                                                                                                             x format...
dos2unix: converting file ./Projects/zstack/linux/demo/framework/macros.h to Uni                                                                                                             x format...
dos2unix: converting file ./Projects/zstack/linux/demo/framework/timer_utils.h t                                                                                                             o Unix format...
dos2unix: converting file ./Projects/zstack/linux/demo/framework/timer_utils.c t                                                                                                             o Unix format...
dos2unix: converting file ./Projects/zstack/linux/demo/framework/tcp_client.h to                                                                                                              Unix format...
dos2unix: converting file ./Projects/zstack/linux/demo/framework/types.h to Unix                                                                                                              format...
dos2unix: converting file ./Projects/zstack/linux/demo/framework/socket_interfac                                                                                                             e.c to Unix format...
dos2unix: converting file ./Projects/zstack/linux/demo/framework/socket_interfac                                                                                                             e.h to Unix format...
dos2unix: converting file ./Projects/zstack/linux/demo/engines/attribute_engine.                                                                                                             h to Unix format...
dos2unix: converting file ./Projects/zstack/linux/demo/engines/device_list_engin                                                                                                             e.h to Unix format...
dos2unix: converting file ./Projects/zstack/linux/demo/engines/network_info_engi                                                                                                             ne.c to Unix format...
dos2unix: converting file ./Projects/zstack/linux/demo/engines/device_list_engin                                                                                                             e.c to Unix format...
dos2unix: converting file ./Projects/zstack/linux/demo/engines/ota_engine.h to U                                                                                                             nix format...
dos2unix: converting file ./Projects/zstack/linux/demo/engines/group_scene_engin                                                                                                             e.c to Unix format...
dos2unix: converting file ./Projects/zstack/linux/demo/engines/state_reflector.h                                                                                                              to Unix format...
dos2unix: converting file ./Projects/zstack/linux/demo/engines/group_scene_engin                                                                                                             e.h to Unix format...
dos2unix: converting file ./Projects/zstack/linux/demo/engines/network_info_engi                                                                                                             ne.h to Unix format...
dos2unix: converting file ./Projects/zstack/linux/demo/engines/sensor_engine.h t                                                                                                             o Unix format...
dos2unix: converting file ./Projects/zstack/linux/demo/engines/attribute_engine.                                                                                                             c to Unix format...
dos2unix: converting file ./Projects/zstack/linux/demo/engines/actions_engine.c                                                                                                              to Unix format...
dos2unix: converting file ./Projects/zstack/linux/demo/engines/system_engine.h t                                                                                                             o Unix format...
dos2unix: converting file ./Projects/zstack/linux/demo/engines/actions_engine.h                                                                                                              to Unix format...
dos2unix: converting file ./Projects/zstack/linux/demo/engines/state_reflector.c                                                                                                              to Unix format...
dos2unix: converting file ./Projects/zstack/linux/demo/engines/commissioning_eng                                                                                                             ine.h to Unix format...
dos2unix: converting file ./Projects/zstack/linux/demo/engines/ota_engine.c to U                                                                                                             nix format...
dos2unix: converting file ./Projects/zstack/linux/demo/engines/sensor_engine.c t                                                                                                             o Unix format...
dos2unix: converting file ./Projects/zstack/linux/demo/engines/commissioning_eng                                                                                                             ine.c to Unix format...
dos2unix: converting file ./Projects/zstack/linux/demo/engines/system_engine.c t                                                                                                             o Unix format...
dos2unix: converting file ./Projects/zstack/linux/demo/project/sample_app_ota.cf                                                                                                             g to Unix format...
dos2unix: Binary symbol 0x1E found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/demo/project/images/5678-                                                                                                             1234-BBBB0000.zigbee
dos2unix: Binary symbol 0x1E found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/demo/project/images/5678-                                                                                                             1234-AAAA0000.zigbee
dos2unix: converting file ./Projects/zstack/linux/demo/project/makefile to Unix                                                                                                              format...
dos2unix: converting file ./Projects/zstack/linux/demo/project/main.c to Unix fo                                                                                                             rmat...
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/demo/project/main.bin
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/demo/project/out/actions_                                                                                                             engine.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/demo/project/out/main.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/demo/project/out/device_l                                                                                                             ist_engine.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/demo/project/out/gateway_                                                                                                             pb_ctrl.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/demo/project/out/user_int                                                                                                             erface.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/demo/project/out/otasrvr.                                                                                                             pb-c.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/demo/project/out/macros.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/demo/project/out/gateway.                                                                                                             pb-c.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/demo/project/out/data_str                                                                                                             uctures.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/demo/project/out/attribut                                                                                                             e_engine.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/demo/project/out/network_                                                                                                             info_engine.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/demo/project/out/nwkmgr.p                                                                                                             b-c.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/demo/project/out/sensor_e                                                                                                             ngine.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/demo/project/out/polling.                                                                                                             o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/demo/project/out/tcp_clie                                                                                                             nt.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/demo/project/out/pb_utils                                                                                                             .o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/demo/project/out/nwkmgr_p                                                                                                             b_ctrl.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/demo/project/out/ota_engi                                                                                                             ne.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/demo/project/out/otasrvr_                                                                                                             pb_ctrl.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/demo/project/out/commissi                                                                                                             oning_engine.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/demo/project/out/configpa                                                                                                             rser.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/demo/project/out/socket_i                                                                                                             nterface.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/demo/project/out/state_re                                                                                                             flector.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/demo/project/out/timer_ut                                                                                                             ils.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/demo/project/out/group_sc                                                                                                             ene_engine.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/demo/project/out/system_e                                                                                                             ngine.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/demo/project/out/trace.o
dos2unix: converting file ./Projects/zstack/linux/srvepconfig/serverep.h to Unix                                                                                                              format...
dos2unix: converting file ./Projects/zstack/linux/srvepconfig/serverep.c to Unix                                                                                                              format...
dos2unix: converting file ./Projects/zstack/linux/RemoTI-Linux-master/Projects/t                                                                                                             ools/LinuxHost/ipclib/common/hal_types.h to Unix format...
dos2unix: converting file ./Projects/zstack/linux/RemoTI-Linux-master/Projects/t                                                                                                             ools/LinuxHost/ipclib/common/npi_lnx.h to Unix format...
dos2unix: converting file ./Projects/zstack/linux/RemoTI-Linux-master/Projects/t                                                                                                             ools/LinuxHost/ipclib/common/npi_lnx_error.h to Unix format...
dos2unix: converting file ./Projects/zstack/linux/RemoTI-Linux-master/Projects/t                                                                                                             ools/LinuxHost/ipclib/common/hal_rpc.h to Unix format...
dos2unix: converting file ./Projects/zstack/linux/RemoTI-Linux-master/Projects/t                                                                                                             ools/LinuxHost/ipclib/common/npi_lnx_ipc_rpc.h to Unix format...
dos2unix: converting file ./Projects/zstack/linux/RemoTI-Linux-master/Projects/t                                                                                                             ools/LinuxHost/ipclib/server/hal_gpio.c to Unix format...
dos2unix: converting file ./Projects/zstack/linux/RemoTI-Linux-master/Projects/t                                                                                                             ools/LinuxHost/ipclib/server/hal_i2c.c to Unix format...
dos2unix: converting file ./Projects/zstack/linux/RemoTI-Linux-master/Projects/t                                                                                                             ools/LinuxHost/ipclib/server/hal_i2c.h to Unix format...
dos2unix: converting file ./Projects/zstack/linux/RemoTI-Linux-master/Projects/t                                                                                                             ools/LinuxHost/ipclib/server/npi_lnx_ipc.c to Unix format...
dos2unix: converting file ./Projects/zstack/linux/RemoTI-Linux-master/Projects/t                                                                                                             ools/LinuxHost/ipclib/server/npi_lnx_uart.c to Unix format...
dos2unix: converting file ./Projects/zstack/linux/RemoTI-Linux-master/Projects/t                                                                                                             ools/LinuxHost/ipclib/server/npi_lnx_uart.h to Unix format...
dos2unix: converting file ./Projects/zstack/linux/RemoTI-Linux-master/Projects/t                                                                                                             ools/LinuxHost/ipclib/server/hal_spi.h to Unix format...
dos2unix: converting file ./Projects/zstack/linux/RemoTI-Linux-master/Projects/t                                                                                                             ools/LinuxHost/ipclib/server/hal_gpio.h to Unix format...
dos2unix: converting file ./Projects/zstack/linux/RemoTI-Linux-master/Projects/t                                                                                                             ools/LinuxHost/ipclib/server/npi_lnx_spi.h to Unix format...
dos2unix: converting file ./Projects/zstack/linux/RemoTI-Linux-master/Projects/t                                                                                                             ools/LinuxHost/ipclib/server/hal_spi.c to Unix format...
dos2unix: converting file ./Projects/zstack/linux/RemoTI-Linux-master/Projects/t                                                                                                             ools/LinuxHost/ipclib/server/aic.h to Unix format...
dos2unix: converting file ./Projects/zstack/linux/RemoTI-Linux-master/Projects/t                                                                                                             ools/LinuxHost/ipclib/server/npi_lnx_i2c.c to Unix format...
dos2unix: converting file ./Projects/zstack/linux/RemoTI-Linux-master/Projects/t                                                                                                             ools/LinuxHost/ipclib/server/npi_lnx_i2c.h to Unix format...
dos2unix: converting file ./Projects/zstack/linux/RemoTI-Linux-master/Projects/t                                                                                                             ools/LinuxHost/ipclib/server/npi_lnx_spi.c to Unix format...
dos2unix: converting file ./Projects/zstack/linux/RemoTI-Linux-master/Projects/t                                                                                                             ools/LinuxHost/makefile to Unix format...
dos2unix: converting file ./Projects/zstack/linux/RemoTI-Linux-master/Projects/t                                                                                                             ools/LinuxHost/NPI_Gateway.cfg to Unix format...
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/RemoTI-Linux-master/Proje                                                                                                             cts/tools/LinuxHost/out/hal_i2c.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/RemoTI-Linux-master/Proje                                                                                                             cts/tools/LinuxHost/out/npi_lnx_i2c.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/RemoTI-Linux-master/Proje                                                                                                             cts/tools/LinuxHost/out/npi_lnx_spi.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/RemoTI-Linux-master/Proje                                                                                                             cts/tools/LinuxHost/out/npi_lnx_ipc.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/RemoTI-Linux-master/Proje                                                                                                             cts/tools/LinuxHost/out/hal_spi.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/RemoTI-Linux-master/Proje                                                                                                             cts/tools/LinuxHost/out/configparser.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/RemoTI-Linux-master/Proje                                                                                                             cts/tools/LinuxHost/out/npi_lnx_uart.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/RemoTI-Linux-master/Proje                                                                                                             cts/tools/LinuxHost/out/trace.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/RemoTI-Linux-master/Proje                                                                                                             cts/tools/LinuxHost/out/hal_gpio.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/RemoTI-Linux-master/Proje                                                                                                             cts/tools/LinuxHost/out/NPI_lnx_arm_server
dos2unix: converting file ./Projects/zstack/linux/zstackserverznp/osal_zstack_se                                                                                                             rver_znp.c to Unix format...
dos2unix: converting file ./Projects/zstack/linux/zstackserverznp/znp_zdo.c to U                                                                                                             nix format...
dos2unix: converting file ./Projects/zstack/linux/zstackserverznp/f8wConfig.h to                                                                                                              Unix format...
dos2unix: converting file ./Projects/zstack/linux/zstackserverznp/znp_misc.c to                                                                                                              Unix format...
dos2unix: converting file ./Projects/zstack/linux/zstackserverznp/zstack_pb_ctrl                                                                                                             .c to Unix format...
dos2unix: converting file ./Projects/zstack/linux/zstackserverznp/zstack_pb_ctrl                                                                                                             .h to Unix format...
dos2unix: converting file ./Projects/zstack/linux/zstackserverznp/config.ini to                                                                                                              Unix format...
dos2unix: converting file ./Projects/zstack/linux/zstackserverznp/Makefile to Un                                                                                                             ix format...
dos2unix: converting file ./Projects/zstack/linux/zstackserverznp/znp_af.c to Un                                                                                                             ix format...
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/zstackserverznp/ZLSZNP_ar                                                                                                             m
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/zstackserverznp/out/znp_m                                                                                                             isc.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/zstackserverznp/out/OnBoa                                                                                                             rd.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/zstackserverznp/out/zstac                                                                                                             kpb.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/zstackserverznp/out/main.                                                                                                             o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/zstackserverznp/out/zmain                                                                                                             .o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/zstackserverznp/out/OSAL.                                                                                                             o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/zstackserverznp/out/saddr                                                                                                             .o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/zstackserverznp/out/znp_a                                                                                                             f.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/zstackserverznp/out/osal_                                                                                                             zstack_server_znp.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/zstackserverznp/out/zstac                                                                                                             k_pb_ctrl.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/zstackserverznp/out/pb_ut                                                                                                             ils.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/zstackserverznp/out/hal_t                                                                                                             imer.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/zstackserverznp/out/zstac                                                                                                             k.pb-c.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/zstackserverznp/out/api_c                                                                                                             lient.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/zstackserverznp/out/confi                                                                                                             gparser.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/zstackserverznp/out/api_s                                                                                                             erver.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/zstackserverznp/out/OSAL_                                                                                                             Timers.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/zstackserverznp/out/OSAL_                                                                                                             PwrMgr.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/zstackserverznp/out/ZLSZN                                                                                                             P_arm
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/zstackserverznp/out/znp_z                                                                                                             do.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/zstackserverznp/out/OSAL_                                                                                                             Memory.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/zstackserverznp/out/trace                                                                                                             .o
dos2unix: converting file ./Projects/zstack/linux/zmac/zmac_internal.h to Unix f                                                                                                             ormat...
dos2unix: converting file ./Projects/zstack/linux/protobuf-c/include/google/prot                                                                                                             obuf-c/protobuf-c.h to Unix format...
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/protobuf-c/lib/arm/libpro                                                                                                             tobuf-c.so.1.0.0
dos2unix: converting file ./Projects/zstack/linux/protobuf-c/lib/arm/pkgconfig/l                                                                                                             ibprotobuf-c.pc to Unix format...
dos2unix: converting file ./Projects/zstack/linux/protobuf-c/lib/arm/libprotobuf                                                                                                             -c.la to Unix format...
dos2unix: Binary symbol 0x00 found at line 3
dos2unix: Skipping binary file ./Projects/zstack/linux/protobuf-c/lib/arm/libpro                                                                                                             tobuf-c.a
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/protobuf-c/lib/x86/libpro                                                                                                             tobuf-c.so.1.0.0
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/protobuf-c/lib/x86/libpro                                                                                                             tobuf-c.so
dos2unix: Binary symbol 0x00 found at line 3
dos2unix: Skipping binary file ./Projects/zstack/linux/protobuf-c/lib/x86/libpro                                                                                                             tobuf-c.a
dos2unix: converting file ./Projects/zstack/linux/zstackpb/zstackpb.c to Unix fo                                                                                                             rmat...
dos2unix: converting file ./Projects/zstack/linux/zstackpb/zstack.pb-c.h to Unix                                                                                                              format...
dos2unix: converting file ./Projects/zstack/linux/zstackpb/zstackpb.h to Unix fo                                                                                                             rmat...
dos2unix: converting file ./Projects/zstack/linux/zstackpb/zstack.pb-c.c to Unix                                                                                                              format...
dos2unix: converting file ./Projects/zstack/linux/serverpb/gatewayp2p.h to Unix                                                                                                              format...
dos2unix: converting file ./Projects/zstack/linux/serverpb/server_pb_ctrl.c to U                                                                                                             nix format...
dos2unix: converting file ./Projects/zstack/linux/serverpb/server.pb-c.h to Unix                                                                                                              format...
dos2unix: converting file ./Projects/zstack/linux/serverpb/gatewayp2p.c to Unix                                                                                                              format...
dos2unix: converting file ./Projects/zstack/linux/serverpb/server.pb-c.c to Unix                                                                                                              format...
dos2unix: converting file ./Projects/zstack/linux/serverpb/server_pb_ctrl.h to U                                                                                                             nix format...
dos2unix: converting file ./Projects/zstack/linux/otaserver/aps_groups.h to Unix                                                                                                              format...
dos2unix: converting file ./Projects/zstack/linux/otaserver/otasrvr.h to Unix fo                                                                                                             rmat...
dos2unix: converting file ./Projects/zstack/linux/otaserver/zcl_otaserver_lnx.c                                                                                                              to Unix format...
dos2unix: converting file ./Projects/zstack/linux/otaserver/zcl_ota.h to Unix fo                                                                                                             rmat...
dos2unix: converting file ./Projects/zstack/linux/otaserver/otasrvr.pb-c.c to Un                                                                                                             ix format...
dos2unix: converting file ./Projects/zstack/linux/otaserver/OtaServer.c to Unix                                                                                                              format...
dos2unix: converting file ./Projects/zstack/linux/otaserver/ota_common.c to Unix                                                                                                              format...
dos2unix: converting file ./Projects/zstack/linux/otaserver/OtaServer_db.h to Un                                                                                                             ix format...
dos2unix: converting file ./Projects/zstack/linux/otaserver/OtaServer.h to Unix                                                                                                              format...
dos2unix: converting file ./Projects/zstack/linux/otaserver/zcl_ota.c to Unix fo                                                                                                             rmat...
dos2unix: converting file ./Projects/zstack/linux/otaserver/otasrvr.c to Unix fo                                                                                                             rmat...
dos2unix: converting file ./Projects/zstack/linux/otaserver/otasrvr_pb_ctrl.h to                                                                                                              Unix format...
dos2unix: converting file ./Projects/zstack/linux/otaserver/zcl_port.c to Unix f                                                                                                             ormat...
dos2unix: converting file ./Projects/zstack/linux/otaserver/otaserver.ini to Uni                                                                                                             x format...
dos2unix: converting file ./Projects/zstack/linux/otaserver/ota_sample_images/Re                                                                                                             adme.txt to Unix format...
dos2unix: Binary symbol 0x1E found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/otaserver/ota_sample_imag                                                                                                             es/5678-1234-0000AAAA.zigbee
dos2unix: Binary symbol 0x1E found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/otaserver/ota_sample_imag                                                                                                             es/5678-1234-0000BBBB.zigbee
dos2unix: converting file ./Projects/zstack/linux/otaserver/Makefile to Unix for                                                                                                             mat...
dos2unix: converting file ./Projects/zstack/linux/otaserver/utils.h to Unix form                                                                                                             at...
dos2unix: converting file ./Projects/zstack/linux/otaserver/otasrvr.pb-c.h to Un                                                                                                             ix format...
dos2unix: converting file ./Projects/zstack/linux/otaserver/OtaServer_db.c to Un                                                                                                             ix format...
dos2unix: converting file ./Projects/zstack/linux/otaserver/otasrvr_pb_ctrl.c to                                                                                                              Unix format...
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/otaserver/out/ota_common.                                                                                                             o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/otaserver/out/zcl_ota.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/otaserver/out/main.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/otaserver/out/server.pb-c                                                                                                             .o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/otaserver/out/OtaServer_d                                                                                                             b.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/otaserver/out/otasrvr.pb-                                                                                                             c.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/otaserver/out/zcl_general                                                                                                             .o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/otaserver/out/SimpleDB.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/otaserver/out/zcl_otaserv                                                                                                             er_lnx.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/otaserver/out/SimpleDBTxt                                                                                                             .o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/otaserver/out/zcl_port.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/otaserver/out/nwkmgr.pb-c                                                                                                             .o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/otaserver/out/otasrvr.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/otaserver/out/zstack_pb_c                                                                                                             trl.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/otaserver/out/pb_utils.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/otaserver/out/zcl.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/otaserver/out/server_pb_c                                                                                                             trl.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/otaserver/out/zstack.pb-c                                                                                                             .o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/otaserver/out/nwkmgr_pb_c                                                                                                             trl.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/otaserver/out/otasrvr_pb_                                                                                                             ctrl.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/otaserver/out/api_client.                                                                                                             o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/otaserver/out/configparse                                                                                                             r.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/otaserver/out/OTA_SRVR_ar                                                                                                             m
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/otaserver/out/api_server.                                                                                                             o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/otaserver/out/OtaServer.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/otaserver/out/gatewayp2p.                                                                                                             o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/otaserver/out/trace.o
dos2unix: converting file ./Projects/zstack/linux/hagateway/gatewayservices.h to                                                                                                              Unix format...
dos2unix: converting file ./Projects/zstack/linux/hagateway/aps_groups.h to Unix                                                                                                              format...
dos2unix: converting file ./Projects/zstack/linux/hagateway/gateway_pb_ctrl.h to                                                                                                              Unix format...
dos2unix: converting file ./Projects/zstack/linux/hagateway/gateway.pb-c.c to Un                                                                                                             ix format...
dos2unix: converting file ./Projects/zstack/linux/hagateway/gatewaysrvr.c to Uni                                                                                                             x format...
dos2unix: converting file ./Projects/zstack/linux/hagateway/gatewaysrvr.h to Uni                                                                                                             x format...
dos2unix: converting file ./Projects/zstack/linux/hagateway/zcl_port.h to Unix f                                                                                                             ormat...
dos2unix: converting file ./Projects/zstack/linux/hagateway/zcl_ha.h to Unix for                                                                                                             mat...
dos2unix: converting file ./Projects/zstack/linux/hagateway/gateway_pb_ctrl.c to                                                                                                              Unix format...
dos2unix: converting file ./Projects/zstack/linux/hagateway/zcl_port.c to Unix f                                                                                                             ormat...
dos2unix: converting file ./Projects/zstack/linux/hagateway/Makefile to Unix for                                                                                                             mat...
dos2unix: converting file ./Projects/zstack/linux/hagateway/gateway_config.tlg t                                                                                                             o Unix format...
dos2unix: converting file ./Projects/zstack/linux/hagateway/gateway_config.ini t                                                                                                             o Unix format...
dos2unix: converting file ./Projects/zstack/linux/hagateway/gatewayservices.c to                                                                                                              Unix format...
dos2unix: converting file ./Projects/zstack/linux/hagateway/aps_groups.c to Unix                                                                                                              format...
dos2unix: converting file ./Projects/zstack/linux/hagateway/gateway.pb-c.h to Un                                                                                                             ix format...
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/hagateway/out/main.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/hagateway/out/gateway_pb_                                                                                                             ctrl.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/hagateway/out/server.pb-c                                                                                                             .o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/hagateway/out/gp_common.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/hagateway/out/gatewaysrvr                                                                                                             .o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/hagateway/out/gp_proxyTbl                                                                                                             .o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/hagateway/out/GATEWAY_SRV                                                                                                             R_arm
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/hagateway/out/zcl_general                                                                                                             .o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/hagateway/out/zcl_lightin                                                                                                             g.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/hagateway/out/zcl_hvac.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/hagateway/out/aps_groups.                                                                                                             o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/hagateway/out/zcl_poll_co                                                                                                             ntrol.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/hagateway/out/gateway.pb-                                                                                                             c.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/hagateway/out/zcl_port.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/hagateway/out/nwkmgr.pb-c                                                                                                             .o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/hagateway/out/serverep.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/hagateway/out/zstack_pb_c                                                                                                             trl.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/hagateway/out/zcl_closure                                                                                                             s.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/hagateway/out/pb_utils.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/hagateway/out/zcl.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/hagateway/out/server_pb_c                                                                                                             trl.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/hagateway/out/zstack.pb-c                                                                                                             .o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/hagateway/out/nwkmgr_pb_c                                                                                                             trl.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/hagateway/out/api_client.                                                                                                             o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/hagateway/out/configparse                                                                                                             r.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/hagateway/out/api_server.                                                                                                             o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/hagateway/out/gatewayserv                                                                                                             ices.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/hagateway/out/zcl_green_p                                                                                                             ower.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/hagateway/out/gatewayp2p.                                                                                                             o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/hagateway/out/trace.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/hagateway/out/zcl_ss.o
dos2unix: converting file ./Projects/zstack/linux/hagateway/gateway.proto to Uni                                                                                                             x format...
dos2unix: converting file ./Projects/zstack/linux/bbb_usbreset/project/makefile                                                                                                              to Unix format...
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/bbb_usbreset/project/out/                                                                                                             bbb_usbreset.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/bbb_usbreset/project/bbb_                                                                                                             usbreset.bin
dos2unix: converting file ./Projects/zstack/linux/bbb_usbreset/source/bbb_usbres                                                                                                             et.c to Unix format...
dos2unix: converting file ./Projects/zstack/linux/hal/hal_mcu.h to Unix format..                                                                                                             .
dos2unix: converting file ./Projects/zstack/linux/hal/hal_types.h to Unix format                                                                                                             ...
dos2unix: converting file ./Projects/zstack/linux/hal/hal_defs.h to Unix format.                                                                                                             ..
dos2unix: converting file ./Projects/zstack/linux/hal/hal_board_cfg.h to Unix fo                                                                                                             rmat...
dos2unix: converting file ./Projects/zstack/linux/hal/hal_timer.c to Unix format                                                                                                             ...
dos2unix: converting file ./Projects/zstack/linux/sdb/SimpleDBTxt.h to Unix form                                                                                                             at...
dos2unix: converting file ./Projects/zstack/linux/sdb/SimpleDB.h to Unix format.                                                                                                             ..
dos2unix: converting file ./Projects/zstack/linux/sdb/SimpleDB.c to Unix format.                                                                                                             ..
dos2unix: converting file ./Projects/zstack/linux/sdb/SimpleDBTxt.c to Unix form                                                                                                             at...
dos2unix: converting file ./Projects/zstack/linux/scripts/package_builder_expect                                                                                                             ed_content_RUNTIME_x86.txt to Unix format...
dos2unix: converting file ./Projects/zstack/linux/scripts/hagateway/track_server                                                                                                             s to Unix format...
dos2unix: converting file ./Projects/zstack/linux/scripts/hagateway/reset/bbb/so                                                                                                             c_reset_hold to Unix format...
dos2unix: converting file ./Projects/zstack/linux/scripts/hagateway/reset/bbb/so                                                                                                             c_reset_release to Unix format...
dos2unix: converting file ./Projects/zstack/linux/scripts/hagateway/reset/soc_re                                                                                                             set_hold to Unix format...
dos2unix: converting file ./Projects/zstack/linux/scripts/hagateway/reset/soc_re                                                                                                             set_release to Unix format...
dos2unix: converting file ./Projects/zstack/linux/scripts/hagateway/zigbeeHAgw t                                                                                                             o Unix format...
dos2unix: converting file ./Projects/zstack/linux/scripts/sample_app/start_appli                                                                                                             cation to Unix format...
dos2unix: converting file ./Projects/zstack/linux/scripts/package_builder_expect                                                                                                             ed_content_RUNTIME_arm.txt to Unix format...
dos2unix: converting file ./Projects/zstack/linux/cc-rom-sbl/deviceTypes.h to Un                                                                                                             ix format...
dos2unix: converting file ./Projects/zstack/linux/cc-rom-sbl/ccxxxxdnld.c to Uni                                                                                                             x format...
dos2unix: converting file ./Projects/zstack/linux/cc-rom-sbl/ccxxxxdnld.h to Uni                                                                                                             x format...
dos2unix: converting file ./Projects/zstack/linux/cc-rom-sbl/sblUart.c to Unix f                                                                                                             ormat...
dos2unix: converting file ./Projects/zstack/linux/cc-rom-sbl/Makefile to Unix fo                                                                                                             rmat...
dos2unix: converting file ./Projects/zstack/linux/cc-rom-sbl/main.c to Unix form                                                                                                             at...
dos2unix: converting file ./Projects/zstack/linux/cc-rom-sbl/sblUart.h to Unix f                                                                                                             ormat...
dos2unix: converting file ./Projects/zstack/linux/nwkmgr/nwkmgrp2p.c to Unix for                                                                                                             mat...
dos2unix: converting file ./Projects/zstack/linux/nwkmgr/aps_groups.h to Unix fo                                                                                                             rmat...
dos2unix: converting file ./Projects/zstack/linux/nwkmgr/nwkmgrservices.c to Uni                                                                                                             x format...
dos2unix: converting file ./Projects/zstack/linux/nwkmgr/nwkmgr.pb-c.c to Unix f                                                                                                             ormat...
dos2unix: converting file ./Projects/zstack/linux/nwkmgr/zcl_ha.h to Unix format                                                                                                             ...
dos2unix: converting file ./Projects/zstack/linux/nwkmgr/nwkmgrdatabase.h to Uni                                                                                                             x format...
dos2unix: converting file ./Projects/zstack/linux/nwkmgr/nwkmgr_pb_ctrl.c to Uni                                                                                                             x format...
dos2unix: converting file ./Projects/zstack/linux/nwkmgr/nwkmgrsrv.h to Unix for                                                                                                             mat...
dos2unix: converting file ./Projects/zstack/linux/nwkmgr/nwkmgrp2p.h to Unix for                                                                                                             mat...
dos2unix: converting file ./Projects/zstack/linux/nwkmgr/Makefile to Unix format                                                                                                             ...
dos2unix: converting file ./Projects/zstack/linux/nwkmgr/nwkmgrsrv.c to Unix for                                                                                                             mat...
dos2unix: converting file ./Projects/zstack/linux/nwkmgr/nwkmgrservices.h to Uni                                                                                                             x format...
dos2unix: converting file ./Projects/zstack/linux/nwkmgr/nwkmgr.pb-c.h to Unix f                                                                                                             ormat...
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/nwkmgr/out/main.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/nwkmgr/out/server.pb-c.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/nwkmgr/out/nwkmgrsrv.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/nwkmgr/out/nwkmgrdatabase                                                                                                             .o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/nwkmgr/out/nwkmgrp2p.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/nwkmgr/out/SimpleDB.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/nwkmgr/out/SimpleDBTxt.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/nwkmgr/out/nwkmgr.pb-c.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/nwkmgr/out/serverep.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/nwkmgr/out/nwkmgrservices                                                                                                             .o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/nwkmgr/out/zstack_pb_ctrl                                                                                                             .o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/nwkmgr/out/pb_utils.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/nwkmgr/out/server_pb_ctrl                                                                                                             .o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/nwkmgr/out/zstack.pb-c.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/nwkmgr/out/nwkmgr_pb_ctrl                                                                                                             .o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/nwkmgr/out/NWKMGR_SRVR_ar                                                                                                             m
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/nwkmgr/out/api_client.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/nwkmgr/out/configparser.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/nwkmgr/out/api_server.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/nwkmgr/out/trace.o
dos2unix: converting file ./Projects/zstack/linux/nwkmgr/nwkmgrdatabase.c to Uni                                                                                                             x format...
dos2unix: converting file ./Projects/zstack/linux/nwkmgr/nwkmgr_config.ini to Un                                                                                                             ix format...
dos2unix: converting file ./Projects/zstack/linux/nwkmgr/nwkmgr_pb_ctrl.h to Uni                                                                                                             x format...
dos2unix: converting file ./Projects/zstack/linux/sbl_tool/Source/zbSocTransport                                                                                                             Uart.h to Unix format...
dos2unix: converting file ./Projects/zstack/linux/sbl_tool/Source/zbSocTransport                                                                                                             Uart.c to Unix format...
dos2unix: converting file ./Projects/zstack/linux/sbl_tool/Source/zbSocCmd.h to                                                                                                              Unix format...
dos2unix: converting file ./Projects/zstack/linux/sbl_tool/Source/zbSocCmd.c to                                                                                                              Unix format...
dos2unix: converting file ./Projects/zstack/linux/sbl_tool/Source/main.c to Unix                                                                                                              format...
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/sbl_tool/project/main.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/sbl_tool/project/zbSocCmd                                                                                                             .o
dos2unix: converting file ./Projects/zstack/linux/sbl_tool/project/Makefile to U                                                                                                             nix format...
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/sbl_tool/project/sbl_tool                                                                                                             .bin
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/sbl_tool/project/zbSocTra                                                                                                             nsportUart.o
dos2unix: converting file ./Projects/zstack/linux/source/pb_utils.c to Unix form                                                                                                             at...
dos2unix: converting file ./Projects/zstack/linux/source/pb_utils.h to Unix form                                                                                                             at...
dos2unix: converting file ./Projects/zstack/linux/source/OnBoard.h to Unix forma                                                                                                             t...
dos2unix: converting file ./Projects/zstack/linux/source/OnBoard.c to Unix forma                                                                                                             t...
dos2unix: converting file ./Projects/zstack/linux/source/zmain.c to Unix format.                                                                                                             ..
dos2unix: converting file ./Projects/zstack/linux/version_query_minitool/Source/                                                                                                             zbSocTransportUart.h to Unix format...
dos2unix: converting file ./Projects/zstack/linux/version_query_minitool/Source/                                                                                                             zbSocTransportUart.c to Unix format...
dos2unix: converting file ./Projects/zstack/linux/version_query_minitool/Source/                                                                                                             zbSocCmd.h to Unix format...
dos2unix: converting file ./Projects/zstack/linux/version_query_minitool/Source/                                                                                                             zbSocCmd.c to Unix format...
dos2unix: converting file ./Projects/zstack/linux/version_query_minitool/Source/                                                                                                             main.c to Unix format...
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/version_query_minitool/pr                                                                                                             oject/main.o
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/version_query_minitool/pr                                                                                                             oject/zbSocCmd.o
dos2unix: converting file ./Projects/zstack/linux/version_query_minitool/project                                                                                                             /Makefile to Unix format...
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/version_query_minitool/pr                                                                                                             oject/gw_soc_fw_version_query.bin
dos2unix: Binary symbol 0x01 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/version_query_minitool/pr                                                                                                             oject/zbSocTransportUart.o
dos2unix: converting file ./Projects/zstack/linux/soc_images/CC2531_USB_Dongle/C                                                                                                             C2531-GW-ZNP_39203_sbl39186.hex to Unix format...
dos2unix: Binary symbol 0x02 found at line 1
dos2unix: Skipping binary file ./Projects/zstack/linux/soc_images/CC2531_USB_Don                                                                                                             gle/CC2531-GW-ZNP_39203.bin
dos2unix: converting file ./Projects/zstack/linux/linux_osal/common/OSAL.c to Un                                                                                                             ix format...
dos2unix: converting file ./Projects/zstack/linux/linux_osal/common/OSAL_Timers.                                                                                                             c to Unix format...
dos2unix: converting file ./Projects/zstack/linux/linux_osal/common/OSAL_PwrMgr.                                                                                                             c to Unix format...
dos2unix: converting file ./Projects/zstack/linux/linux_osal/common/OSAL_Memory.                                                                                                             c to Unix format...
dos2unix: converting file ./Projects/zstack/linux/linux_osal/include/saddr.h to                                                                                                              Unix format...
dos2unix: converting file ./Projects/zstack/linux/linux_osal/include/OSAL_PwrMgr                                                                                                             .h to Unix format...
dos2unix: converting file ./Projects/zstack/linux/linux_osal/include/comdef.h to                                                                                                              Unix format...
dos2unix: converting file ./Projects/zstack/linux/linux_osal/include/OSAL_Tasks.                                                                                                             h to Unix format...
dos2unix: converting file ./Projects/zstack/linux/linux_osal/include/ZComDef.h t                                                                                                             o Unix format...
dos2unix: converting file ./Projects/zstack/linux/linux_osal/include/OSAL_Nv.h t                                                                                                             o Unix format...
dos2unix: converting file ./Projects/zstack/linux/linux_osal/include/sdata.h to                                                                                                              Unix format...
dos2unix: converting file ./Projects/zstack/linux/linux_osal/include/OSAL_Timers                                                                                                             .h to Unix format...
dos2unix: converting file ./Projects/zstack/linux/linux_osal/include/OSAL_Memory                                                                                                             .h to Unix format...
dos2unix: converting file ./Projects/zstack/linux/linux_osal/include/OSAL.h to U                                                                                                             nix format...
dos2unix: converting file ./Projects/zstack/OTA/Source/ota_common.h to Unix form                                                                                                             at...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/package.json to Unix                                                                                                              format...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/README.md to Unix for                                                                                                             mat...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/public                                                                                                             /webapp.html to Unix format...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/public                                                                                                             /zb_lib.js to Unix format...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/public                                                                                                             /webapp.js to Unix format...
dos2unix: Binary symbol 0x1A found at line 2
dos2unix: Skipping binary file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/p                                                                                                             ublic/dist/img/lock.png
dos2unix: Binary symbol 0x1A found at line 2
dos2unix: Skipping binary file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/p                                                                                                             ublic/dist/img/light_off.png
dos2unix: Binary symbol 0x1A found at line 2
dos2unix: Skipping binary file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/p                                                                                                             ublic/dist/img/light_on.png
dos2unix: Binary symbol 0x1A found at line 2
dos2unix: Skipping binary file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/p                                                                                                             ublic/dist/img/unlock.png
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/public                                                                                                             /dist/css/bootstrap-grid.css.map to Unix format...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/public                                                                                                             /dist/css/bootstrap-grid.min.css to Unix format...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/public                                                                                                             /dist/css/bootstrap-grid.min.css.map to Unix format...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/public                                                                                                             /dist/css/bootstrap.css to Unix format...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/public                                                                                                             /dist/css/bootstrap.css.map to Unix format...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/public                                                                                                             /dist/css/slider.css to Unix format...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/public                                                                                                             /dist/css/bootstrap.min.css to Unix format...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/public                                                                                                             /dist/css/bootstrap-reboot.min.css to Unix format...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/public                                                                                                             /dist/css/bootstrap.min.css.map to Unix format...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/public                                                                                                             /dist/css/bootstrap-reboot.css to Unix format...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/public                                                                                                             /dist/css/bootstrap-grid.css to Unix format...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/public                                                                                                             /dist/css/bootstrap-reboot.min.css.map to Unix format...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/public                                                                                                             /dist/css/bootstrap-reboot.css.map to Unix format...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/public                                                                                                             /dist/jquery/jquery-1.12.0.min.js to Unix format...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/public                                                                                                             /dist/js/bootstrap.bundle.js.map to Unix format...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/public                                                                                                             /dist/js/bootstrap.bundle.min.js to Unix format...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/public                                                                                                             /dist/js/bootstrap.js to Unix format...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/public                                                                                                             /dist/js/popper.min.js to Unix format...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/public                                                                                                             /dist/js/Chart.min.js to Unix format...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/public                                                                                                             /dist/js/bootstrap.min.js to Unix format...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/public                                                                                                             /dist/js/bootstrap.js.map to Unix format...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/public                                                                                                             /dist/js/bootstrap.min.js.map to Unix format...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/public                                                                                                             /dist/js/bootstrap.bundle.min.js.map to Unix format...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/public                                                                                                             /dist/js/bootstrap.bundle.js to Unix format...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/cloudWebServer/cloudW                                                                                                             ebServer.js to Unix format...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/.project to Unix form                                                                                                             at...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/.cfignore to Unix for                                                                                                             mat...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/README.html to Unix f                                                                                                             ormat...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/manifest.yml to Unix                                                                                                              format...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/ibmConfig.json to Uni                                                                                                             x format...
dos2unix: converting file ./Projects/cloud_apps/ibm-webapp/app.js to Unix format                                                                                                             ...
dos2unix: converting file ./Projects/node/README.md to Unix format...
dos2unix: converting file ./Projects/node/end.sh to Unix format...
dos2unix: converting file ./Projects/node/start_gateway.sh to Unix format...
dos2unix: converting file ./Projects/node/start_ibm.sh to Unix format...
dos2unix: converting file ./Projects/node/start_local.sh to Unix format...
dos2unix: converting file ./Projects/node/README.html to Unix format...
SUCCESS: Converted Scripts to Unix Line endings
Entered /Projets/node/nodejs_zb_gateway Directory

Installing Node Modules

npm WARN nodejs_zb_gateway@1.0.0 No repository field.
SUCCESS: Installed all Node Modules Successfully
/home/debian/source

Make build_all executable

SUCCESS: build_all script is now executable

Make scripts/ executable

SUCCESS: scripts/ folder is now executable

Run ./build_all

./package_builder: line 22: svnversion: command not found
SVN Version =

Main project\'s base directory: GATEWAY=/home/debian/source (leave blank to use                                                                                                              the detault)
Project output subdirectory: PKGS_OUTPUT_DIR=/home/debian/source/out (leave blan                                                                                                             k to use the detault)

Building RUNTIME package for BEAGLEBONE_BLACK platform

********************************************************
Cleaning all
if test -d out; then rm -rf out; fi
rm -f project_file_list.txt
********************************************************
Check existance of output folder
if test ! -d out; then mkdir out; fi
********************************************************
COMPILING SERVER FOR ARM BEAGLE BONE
make[1]: Entering directory '/home/debian/source/Projects/zstack/linux/RemoTI-Li                                                                                                             nux-master/Projects/tools/LinuxHost'
Compiling ipclib/server/npi_lnx_ipc.c ...
Compiling ipclib/server/npi_lnx_uart.c ...
Compiling ipclib/server/npi_lnx_spi.c ...
Compiling ipclib/server/npi_lnx_i2c.c ...
Compiling ipclib/server/hal_gpio.c ...
Compiling ipclib/server/hal_i2c.c ...
Compiling ../../../../srvwrapper/trace.c ...
Compiling ipclib/server/hal_spi.c ...
Compiling ../../../../srvwrapper/configparser.c ...
Building target out/NPI_lnx_arm_server ...
********************************************************
make[1]: Leaving directory '/home/debian/source/Projects/zstack/linux/RemoTI-Lin                                                                                                             ux-master/Projects/tools/LinuxHost'
Cleaning up out/*
********************************************************
Check existance of output folder
if test ! -d out; then mkdir out; fi
********************************************************
COMPILING APP FOR ARM
make[1]: Entering directory '/home/debian/source/Projects/zstack/linux/zstackser                                                                                                             verznp'
Compiling osal_zstack_server_znp.c ...
Compiling ../source/zmain.c ...
Compiling znp_af.c ...
Compiling znp_misc.c ...
Compiling znp_zdo.c ...
Compiling ../zstackpb/zstack.pb-c.c ...
Compiling ../zstackpb/zstackpb.c ...
Compiling ../srvwrapper/api_client.c ...
Compiling ../srvwrapper/trace.c ...
Compiling ../srvwrapper/main.c ...
Compiling ../srvwrapper/api_server.c ...
Compiling ../srvwrapper/configparser.c ...
Compiling ../linux_osal/common/OSAL_Memory.c ...
Compiling ../linux_osal/common/OSAL_PwrMgr.c ...
Compiling ../linux_osal/common/OSAL_Timers.c ...
Compiling ../linux_osal/common/OSAL.c ...
Compiling ../../../../Components/services/saddr/saddr.c ...
Compiling ../source/OnBoard.c ...
Compiling ../hal/hal_timer.c ...
Compiling ../source/pb_utils.c ...
Compiling ../zstackserverznp/zstack_pb_ctrl.c ...
Building target ZLSZNP_arm ...
********************************************************
make[1]: Leaving directory '/home/debian/source/Projects/zstack/linux/zstackserv                                                                                                             erznp'
********************************************************
Cleaning all
if test -d out; then rm -rf out; fi
/bin/rm -f project_file_list.txt
/bin/rm -f actual_standard_project_file_list.txt
/bin/rm -f actual_specific_project_file_list.txt
********************************************************
Check existance of output folder
if test ! -d out; then mkdir out; fi
********************************************************
COMPILING APP FOR ARM
make[1]: Entering directory '/home/debian/source/Projects/zstack/linux/nwkmgr'
Compiling ../srvepconfig/serverep.c ...
Compiling nwkmgrsrv.c ...
Compiling nwkmgrdatabase.c ...
Compiling ../srvwrapper/trace.c ...
Compiling ../sdb/SimpleDB.c ...
Compiling ../sdb/SimpleDBTxt.c ...
Compiling nwkmgrservices.c ...
Compiling nwkmgrp2p.c ...
Compiling nwkmgr.pb-c.c ...
Compiling ../zstackpb/zstack.pb-c.c ...
Compiling ../serverpb/server.pb-c.c ...
Compiling ../srvwrapper/api_client.c ...
Compiling ../srvwrapper/main.c ...
Compiling ../srvwrapper/api_server.c ...
Compiling ../srvwrapper/configparser.c ...
Compiling ../source/pb_utils.c ...
Compiling ../zstackserverznp/zstack_pb_ctrl.c ...
Compiling ../nwkmgr/nwkmgr_pb_ctrl.c ...
Compiling ../serverpb/server_pb_ctrl.c ...
Building target out/NWKMGR_SRVR_arm ...
********************************************************
make[1]: Leaving directory '/home/debian/source/Projects/zstack/linux/nwkmgr'
********************************************************
Cleaning all
if test -d out; then rm -rf out; fi
/bin/rm -f project_file_list.txt
/bin/rm -f actual_specific_project_file_list.txt
/bin/rm -f actual_standard_project_file_list.txt
********************************************************
Check existance of output folder
if test ! -d out; then mkdir out; fi
********************************************************
COMPILING APP FOR ARM
make[1]: Entering directory '/home/debian/source/Projects/zstack/linux/hagateway                                                                                                             '
Compiling ../srvepconfig/serverep.c ...
Compiling gatewaysrvr.c ...
Compiling ../srvwrapper/trace.c ...
Compiling gatewayservices.c ...
Compiling ../serverpb/gatewayp2p.c ...
Compiling gateway.pb-c.c ...
Compiling ../zstackpb/zstack.pb-c.c ...
Compiling ../serverpb/server.pb-c.c ...
Compiling ../srvwrapper/api_client.c ...
Compiling ../srvwrapper/main.c ...
Compiling ../srvwrapper/api_server.c ...
Compiling ../srvwrapper/configparser.c ...
Compiling ../../../../Components/stack/gp/gp_common.c ...
Compiling ../../../../Components/stack/gp/gp_proxyTbl.c ...
Compiling ../../../../Components/stack/zcl/zcl_green_power.c ...
Compiling ../../../../Components/stack/zcl/zcl_general.c ...
Compiling ../../../../Components/stack/zcl/zcl_poll_control.c ...
Compiling ../../../../Components/stack/zcl/zcl_lighting.c ...
Compiling ../../../../Components/stack/zcl/zcl_closures.c ...
Compiling ../../../../Components/stack/zcl/zcl_hvac.c ...
Compiling ../../../../Components/stack/zcl/zcl_ss.c ...
Compiling ../../../../Components/stack/zcl/zcl.c ...
Compiling aps_groups.c ...
Compiling zcl_port.c ...
Compiling ../source/pb_utils.c ...
Compiling ../zstackserverznp/zstack_pb_ctrl.c ...
Compiling ../hagateway/gateway_pb_ctrl.c ...
Compiling ../nwkmgr/nwkmgr_pb_ctrl.c ...
Compiling ../serverpb/server_pb_ctrl.c ...
Compiling ../nwkmgr/nwkmgr.pb-c.c ...
Building target out/GATEWAY_SRVR_arm ...
********************************************************
make[1]: Leaving directory '/home/debian/source/Projects/zstack/linux/hagateway'
********************************************************
Cleaning all
if test -d out; then rm -rf out; fi
/bin/rm -f project_file_list.txt
/bin/rm -f actual_specific_project_file_list.txt
/bin/rm -f actual_standard_project_file_list.txt
********************************************************
Check existance of output folder
if test ! -d out; then mkdir out; fi
********************************************************
COMPILING APP FOR ARM
make[1]: Entering directory '/home/debian/source/Projects/zstack/linux/otaserver                                                                                                             '
Compiling ../zstackpb/zstack.pb-c.c ...
Compiling ../../../../Components/stack/zcl/zcl_general.c ...
Compiling ../../../../Components/stack/zcl/zcl.c ...
Compiling zcl_ota.c ...
Compiling ../srvwrapper/api_client.c ...
Compiling ../srvwrapper/api_server.c ...
Compiling ../srvwrapper/main.c ...
Compiling zcl_otaserver_lnx.c ...
Compiling OtaServer.c ...
Compiling OtaServer_db.c ...
Compiling ../sdb/SimpleDB.c ...
Compiling ../sdb/SimpleDBTxt.c ...
Compiling ../srvwrapper/configparser.c ...
Compiling ota_common.c ...
Compiling otasrvr.c ...
Compiling otasrvr.pb-c.c ...
Compiling ../serverpb/server.pb-c.c ...
Compiling ../srvwrapper/trace.c ...
Compiling ../serverpb/gatewayp2p.c ...
Compiling zcl_port.c ...
Compiling ../source/pb_utils.c ...
Compiling ../zstackserverznp/zstack_pb_ctrl.c ...
Compiling ../otaserver/otasrvr_pb_ctrl.c ...
Compiling ../nwkmgr/nwkmgr_pb_ctrl.c ...
Compiling ../serverpb/server_pb_ctrl.c ...
Compiling ../nwkmgr/nwkmgr.pb-c.c ...
Building target out/OTA_SRVR_arm ...
********************************************************
make[1]: Leaving directory '/home/debian/source/Projects/zstack/linux/otaserver'
********************************************************
Cleaning up ./out/*
if test -d ./out; then rm -rf ./out; fi
rm -f main.bin
rm -f project_file_list.txt
********************************************************
Check existance of output folder
if test ! -d ./out; then mkdir ./out; fi
********************************************************
COMPILING APP FOR ARM
make[1]: Entering directory '/home/debian/source/Projects/zstack/linux/demo/proj                                                                                                             ect'
Compiling main.c ...
Compiling ../framework/polling.c ...
Compiling ../framework/timer_utils.c ...
Compiling ../framework/socket_interface.c ...
Compiling ../framework/tcp_client.c ...
Compiling ../framework/user_interface.c ...
Compiling ../framework/data_structures.c ...
Compiling ../engines/network_info_engine.c ...
Compiling ../engines/device_list_engine.c ...
Compiling ../engines/sensor_engine.c ...
Compiling ../engines/state_reflector.c ...
Compiling ../engines/attribute_engine.c ...
Compiling ../engines/actions_engine.c ...
Compiling ../engines/commissioning_engine.c ...
Compiling ../engines/system_engine.c ...
Compiling ../engines/ota_engine.c ...
Compiling ../../nwkmgr/nwkmgr.pb-c.c ...
Compiling ../../hagateway/gateway.pb-c.c ...
Compiling ../../otaserver/otasrvr.pb-c.c ...
Compiling ../engines/group_scene_engine.c ...
Compiling ../framework/macros.c ...
Compiling ../../source/pb_utils.c ...
Compiling ../../nwkmgr/nwkmgr_pb_ctrl.c ...
Compiling ../../hagateway/gateway_pb_ctrl.c ...
Compiling ../../otaserver/otasrvr_pb_ctrl.c ...
Compiling ../../srvwrapper/trace.c ...
In file included from ../../srvwrapper/trace.c:52:0:
../../srvwrapper/trace.c: In function ‘trace_init_thread’:
../../srvwrapper/trace.h:198:44: warning: right-hand operand of comma expression                                                                                                              has no effect [-Wunused-value]
 #define PTHREAD_SETSPECIFIC(A,B) ((A) = (B), 0)
                                  ~~~~~~~~~~^~~~
../../srvwrapper/trace.c:187:3: note: in expansion of macro ‘PTHREAD_SETSPECIFIC                                                                                                             ’
   PTHREAD_SETSPECIFIC(thread_name_key, NULL);
   ^~~~~~~~~~~~~~~~~~~
Compiling ../../srvwrapper/configparser.c ...
Building main.bin for arm ...
********************************************************
make[1]: Leaving directory '/home/debian/source/Projects/zstack/linux/demo/proje                                                                                                             ct'
rm -rf *.o sbl_tool.bin
arm-linux-gnueabihf-gcc -Wall -DVERSION_NUMBER="0.1"  -D_GNU_SOURCE -DxHAL_UART_                                                                                                             SPI -c -o main.o ../Source/main.c
arm-linux-gnueabihf-gcc -Wall -DVERSION_NUMBER="0.1"  -D_GNU_SOURCE -DxHAL_UART_                                                                                                             SPI -c -o zbSocCmd.o ../Source/zbSocCmd.c
arm-linux-gnueabihf-gcc -Wall -DVERSION_NUMBER="0.1"  -D_GNU_SOURCE -DxHAL_UART_                                                                                                             SPI -c -o zbSocTransportUart.o ../Source/zbSocTransportUart.c
********************************************************
Compiler: arm-linux-gnueabihf-gcc
Target platform: arm
********************************************************
Building sbl_tool.bin ...
arm-linux-gnueabihf-gcc -Wall -DVERSION_NUMBER="0.1" main.o zbSocCmd.o zbSocTran                                                                                                             sportUart.o -L.../usr/lib/  -o sbl_tool.bin
********************************************************
rm -rf *.o gw_soc_fw_version_query.bin
arm-linux-gnueabihf-gcc -Wall -DVERSION_NUMBER="0.1"  -D_GNU_SOURCE -DxHAL_UART_                                                                                                             SPI -c -o main.o ../Source/main.c
arm-linux-gnueabihf-gcc -Wall -DVERSION_NUMBER="0.1"  -D_GNU_SOURCE -DxHAL_UART_                                                                                                             SPI -c -o zbSocCmd.o ../Source/zbSocCmd.c
arm-linux-gnueabihf-gcc -Wall -DVERSION_NUMBER="0.1"  -D_GNU_SOURCE -DxHAL_UART_                                                                                                             SPI -c -o zbSocTransportUart.o ../Source/zbSocTransportUart.c
********************************************************
Compiler: arm-linux-gnueabihf-gcc
Target platform: arm
********************************************************
Building gw_soc_fw_version_query.bin ...
arm-linux-gnueabihf-gcc -Wall -DVERSION_NUMBER="0.1" main.o zbSocCmd.o zbSocTran                                                                                                             sportUart.o -L.../usr/lib/  -o gw_soc_fw_version_query.bin
********************************************************
********************************************************
Cleaning up out/*
if test -d out; then rm -rf out; fi
/bin/rm -f usbreset.bin out/*
/bin/rm -f *project_file_list.txt
VPATH is .
********************************************************
Check existance of output folder
if test ! -d out; then mkdir out; fi
********************************************************
COMPILING APP FOR ARM
make[1]: Entering directory '/home/debian/source/Projects/zstack/linux/usbreset/                                                                                                             project'
/home/debian/source/Projects/zstack/linux/usbreset/project
Compiling ../source/usbreset.c ...
Building usbreset.bin for arm ...
********************************************************
make[1]: Leaving directory '/home/debian/source/Projects/zstack/linux/usbreset/p                                                                                                             roject'

Package verification results:
ERROR: 1 warning(s) occured during make
diff /home/debian/source/out/content.txt /home/debian/source/out/expected_conten                                                                                                             t.txt

OK: RUNTIME package for arm created Successfully

SUCCESS: build_all finished.
Entered Precompiled directory.
tar: ../Precompiled.tar: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
app/
app/main.bin
misc/
misc/ota_sample_images/
misc/ota_sample_images/5678-1234-0000AAAA.zigbee
misc/ota_sample_images/5678-1234-0000BBBB.zigbee
misc/CC2531-GW-ZNP_39203.bin
protobuf/
protobuf/libprotobuf-c.so.1.0.0
servers/
servers/GATEWAY_SRVR_arm
servers/sample_app_ota.cfg
servers/track_servers
servers/config.ini
servers/NPI_Gateway.cfg
servers/start_application
servers/zigbeeHAgw
servers/NWKMGR_SRVR_arm
servers/gateway_config.tlg
servers/OTA_SRVR_arm
servers/gateway_config.ini
servers/ZLSZNP_arm
servers/nwkmgr_config.ini
servers/NPI_lnx_arm_server
tools/
tools/soc_reset_hold
tools/usbreset.bin
tools/gw_soc_fw_version_query.bin
tools/sbl_tool.bin
tools/soc_reset_release
SUCCESS: Extracted binaries
Entered servers/ directory

Make apps exe, copy protobuf files

SUCCESS: Made servers and applications executable
SUCCESS: Made /tools/ folder executable

Copy Protobuf Files to /usr/lib directory

SUCCESS: Copied Protobuf Files

********** SETUP SUCCESSFUL! **********


 --------- Getting Started Tips -----------

Navigate to Node Scripts ==> cd Projects/node

Start Linux Zigbee Gateway and Node.js Zigbee Local Gateway ==> sudo ./start_loc                                                                                                             al.sh

Start Linux Zigbee Gateway and Node.js IBM Gateway ==> sudo ./start_ibm.sh

Start Linux Zigbee Gateway Only ==> sudo ./start_gateway.sh

Kill All Gateways ==> sudo ./end.sh

---------------------------------------------

debian@beaglebone:~/source$ cd ~/source/out/Precompiled/servers
debian@beaglebone:~/source/out/Precompiled/servers$ sudo ./zigbeeHAgw
Platform type selected automatically as bbb.
To override this selection, please stop this script, and then run it again,
specifying the desired platform type at the command line:
  ./zigbeeHAgw [help | bbb | x86 ]

running ./zigbeeHAgw on an ARM
done processing arguments, board type bbb, target arm
NPI                 is 'NPI_lnx_arm_server'
Zstack linux server is 'ZLSZNP_arm'
gateway server      is 'GATEWAY_SRVR_arm'
network manager     is 'NWKMGR_SRVR_arm'
OTA server        is 'OTA_SRVR_arm'
Starting the ZigBee gateway subsystem
making sure there are no lingering servers...
there are 0 NPI servers
there are 0 ZLS servers
there are 0 GATEWAY servers
there are 0 NWKMGR servers
there are 0 OTA servers
(total 0)
done
Executing reset from external scripts
===================================================
starting NPI, cmd ' ./NPI_lnx_arm_server NPI_Gateway.cfg -v 0x0000010E ' on Sun                                                                                                              Jul 26 07:48:58 UTC 2020
[07:48:58.704,572] [NPISRVR/MAIN] UNMSKBL:
[07:48:58.708,510] [NPISRVR/MAIN] UNMSKBL:  ************************************                                                                                                             ************
[07:48:58.708,547] [NPISRVR/MAIN] UNMSKBL:  *  NPI Server v1.0.2d                                                                                                                                       *
[07:48:58.708,570] [NPISRVR/MAIN] UNMSKBL:  ************************************                                                                                                             ************
[07:48:58.708,592] [NPISRVR/MAIN] UNMSKBL:
Startup phase 1 completed successfully, server started (NPI_PID=3105) on Sun Jul                                                                                                              26 07:49:03 UTC 2020
===================================================
starting ZLSZNP, cmd ' ./ZLSZNP_arm 127.0.0.1:2533 config.ini -v 0x0000460E ' on                                                                                                              Sun Jul 26 07:49:03 UTC 2020
[07:49:03.956,066] [Z_STACK/MAIN] UNMSKBL:
[07:49:03.959,473] [Z_STACK/MAIN] UNMSKBL:  ************************************                                                                                                             ************
[07:49:03.960,436] [Z_STACK/MAIN] UNMSKBL:  *  ZStack Server for ZNP v1.0.2d                                                                                                                            *
[07:49:03.961,527] [Z_STACK/MAIN] UNMSKBL:  ************************************                                                                                                             ************
[07:49:03.962,163] [Z_STACK/MAIN] UNMSKBL:
[07:49:03.965,074] [Z_STACK/MAIN] PKTTYPE: [         NPISRVR<<Z_STACK                                                                                                                                        ] [AREQ] 08:5F:00:02:5A:5F:53:54:41:43:4B
[07:49:03.966,841] [NPISRVR/MAIN] PKT_HEX: New incoming connection from client Z                                                                                                             _STACK (connection # 5)
[07:49:03.970,040] [Z_STACK/MAIN] PKTTYPE: [         NPISRVR<<Z_STACK                                                                                                                                        ] [SREQ] 02:25:3E:FF:FF
[07:49:03.972,987] [NPISRVR/MAIN] PKT_HEX: [SOCZIGB<<NPISRVR                                                                                                                                                 ] [send] 02:25:3E:FF:FF
ERR:: Input/output error
[ERR] npi_ipc_errno 0x02030100
Exit socket while loop
[07:49:05.979,918] [Z_STACK/MAIN] ERROR  : SRSP Cond Wait timed out!
[07:49:05.980,327] [Z_STACK/MAIN] ERROR  : apicSendSynchData() failed getting re                                                                                                             sponse
[07:49:05.980,477] [Z_STACK/MAIN] PKTTYPE: [         NPISRVR<<Z_STACK                                                                                                                                        ] [SREQ] 01:2F:09:00
[07:49:07.981,368] [Z_STACK/MAIN] ERROR  : SRSP Cond Wait timed out!
[07:49:07.981,775] [Z_STACK/MAIN] ERROR  : apicSendSynchData() failed getting re                                                                                                             sponse
[07:49:07.981,928] [Z_STACK/MAIN] PKTTYPE: [         NPISRVR<<Z_STACK                                                                                                                                        ] [SREQ] 01:2F:06:00
Startup phase 2 failed
NPI_lnx_arm_server: no process found
waiting for NPI to exit
making sure there are no lingering servers...
there are 0 NPI servers
there are 0 ZLS servers
there are 0 GATEWAY servers
there are 0 NWKMGR servers
there are 0 OTA servers
(total 0)
done
Executing reset from external scripts
===================================================
starting NPI, cmd ' ./NPI_lnx_arm_server NPI_Gateway.cfg -v 0x0000010E ' on Sun                                                                                                              Jul 26 07:49:12 UTC 2020
[07:49:12.532,248] [NPISRVR/MAIN] UNMSKBL:
[07:49:12.534,016] [NPISRVR/MAIN] UNMSKBL:  ************************************                                                                                                             ************
[07:49:12.534,116] [NPISRVR/MAIN] UNMSKBL:  *  NPI Server v1.0.2d                                                                                                                                       *
[07:49:12.534,146] [NPISRVR/MAIN] UNMSKBL:  ************************************                                                                                                             ************
[07:49:12.534,169] [NPISRVR/MAIN] UNMSKBL:
^Ccaught SIGTERM, killing all the servers and cleaning up
making sure there are no lingering servers...
there are 1 NPI servers
there are 0 ZLS servers
there are 0 GATEWAY servers
there are 0 NWKMGR servers
there are 0 OTA servers
(total 1)
there are 1 NPI servers
there are 0 ZLS servers
there are 0 GATEWAY servers
there are 0 NWKMGR servers
there are 0 OTA servers
(total 1)
there are 1 NPI servers
there are 0 ZLS servers
there are 0 GATEWAY servers
there are 0 NWKMGR servers
there are 0 OTA servers
(total 1)
there are 1 NPI servers
there are 0 ZLS servers
there are 0 GATEWAY servers
there are 0 NWKMGR servers
there are 0 OTA servers
(total 1)
there are 0 NPI servers
there are 0 ZLS servers
there are 0 GATEWAY servers
there are 0 NWKMGR servers
there are 0 OTA servers
(total 0)
done
terminating zigbeeHAGW (pid 3063)
Killed
debian@beaglebone:~/source/out/Precompiled/servers$