• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 55 subscribers
  • Views 115 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

CC2652P: Cluster attributes in sampleApp_Attrs[ ] generated by Syscfg Zigbee Application Builder are not in ascending or...

CC2652P: Cluster attributes in sampleApp_Attrs[ ] generated by Syscfg Zigbee Application Builder are not in ascending order

Gene L
Prodigy 80 points
Part Number: CC2652P

In the previous post Ryan stated the following:  I've submitted this information to the Software Development Team and am waiting for their recommended resolution path.

That was over a month ago.  Has there been a response from the Software Development Team?

Regards,

Gene

  • 0
    TI__Guru**** 202096 points

    Hi Gene,

    I apologize for letting the previous post slip and not updating you on developments regarding this issue.  Due to other commitments, Software Development has not yet been able to address this issue so at this point it will not be resolved for the SIMPLELINK-CC13S2-26X2-SDK v5.10.  However they are aware of the behavior and plan to address it during the second quarter of 2021.  I once again apologize for the delay and will make a greater effort to update this thread when possible.

    Regards,
    Ryan

  • 0 in reply to Ryan Brown1
    Prodigy 80 points

    Hi Ryan,

    Thank you for the update.  Please let me know when the fix is available.

    Regards,

    Gene