This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TIDC-CC2650STK-SENSORTAG: Restrictions for using on products for customers (industrial machines)

Part Number: TIDC-CC2650STK-SENSORTAG
Other Parts Discussed in Thread: CC2650STK, Z-STACK

Hi to everyone,

I would like to know if the CC2650STK card has the requirements to be installed on an operating machine (sold to customers) or does it have any limitations for its use?

Our case:

  • a custom DevPack was designed and built (module for reading other physical quantities) to be interfaced with the CC2650STK base board.
  • many boards will be mounted on the customer product (CC2650STK + CUSTOM_DEVPACK)
  • you are using the Zigbee PRO 2012 protocol
  • the base firmware used is Z-Stack_Home_1.2.2a; this was then modified to suit our needs.

Thanks!