Other Parts Discussed in Thread: CC2592, CC2530
I want to test the S11 of CC2530+CC2592 RF TX and RX chain.
Use SmartRF Studio 7 to set TX or RX mode for CC2530+CC2592, how to confirm if CC2592 is working at a right mode (TX=PA mode, RX=LNA mode) ?
CC2530 P1.1 connect to CC2592 PA_EN
CC2530 P1.3 connect to CC2592 LNA_EN
CC2530 P0.7 connect to CC2592 HGM