CC2652P: NPI Server not starting

Umesha G

Part Number: CC2652P
Other Parts Discussed in Thread: CC2652RB

We have Yocto rootfs running on our I.MX8MM board. We have precompiled Zstack for 32 bit ARM Platform.

When we tried to start NPIServer application in precompiled/server folder , its not starting. We are using TI Board CC2652RB /CC2652P

Need immediate help on this.

Regards

Umesh

over 2 years ago

0 Ryan Brown1 over 2 years ago

TI__Guru**** 202256 points

Hi Umesh,

Here is a relevant thread: https://e2e.ti.com/f/1/t/1005628

I assume you will need to re-compile protobuf for the ARMv8 architecture on the i.MX8, this thread gives an example of how compile flags must be changed: https://e2e.ti.com/f/1/t/993930

ZIGBEE-LINUX-SENSOR-TO-CLOUD was built and tested using Debian 9.3 on Ubuntu 18 OS or BeagleBone Black platforms. Please provide build settings, gateway logs, and other information if you continue to experience difficulties.

Regards,
Ryan

Zigbee & Thread

Zigbee & Thread forum

CC2652P: NPI Server not starting