Other Parts Discussed in Thread: Z-STACK,
SDK: CC13x2 / 26x2 SDK Z-Stack 5.20.00
Demo:ZNP
Chip:CC2652P1F
Our RF engineers want to test Zigbee performance. How should we build a test environment? Is there any relevant software?
BR
Victor
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
SDK: CC13x2 / 26x2 SDK Z-Stack 5.20.00
Demo:ZNP
Chip:CC2652P1F
Our RF engineers want to test Zigbee performance. How should we build a test environment? Is there any relevant software?
BR
Victor
Hi Victor,
RF testing can typically be accomplished with SmartRF Studio, but if you want more specific control of Zigbee network settings then you could use Z-Tool software as a host to the ZNP firmware.
Regards,
Ryan
Hi YiKai,
1. You can use SYS_SET_TX_POWER to set ZNP tx power in dbm.
→Do I need to keep sending TX data during testing? I still have a question about how to start TX Test using Z-tool,or we have to use SmartRF Studio to test.
Our RF engineers need to test the signal indicators.