• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 55 subscribers
  • Views 293 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2531USB-RD: CC2531, Zigbee, F28335 microcontroller

Marcus Ong
Prodigy 90 points
Part Number: CC2531USB-RD
Other Parts Discussed in Thread: CC2531

Hi all,

I managed to get my CC2531 to work with Zboss and Wireshark.
I am facing a problem where by the result shown is always beacon request.

Are there any way I can get it to receive data which I am sending on my microcontroller which is suppose to send an increment of 5 from 0 to 255 and it repeats itself.

best regards,
Marcus Ong

  • +1
    TI__Guru**** 202106 points

    Hi Marcus,

    Since TI does not maintain the ZBOSS stack, you will need to contact DSR for more information concerning how to correctly set up and use their solution.  One recommendation is that you closely follow their Getting Started and User Guide documentation to further understand how to commission your device and communicate on a Zigbee network.

    Regards,
    Ryan