Hi,
I have a custom dev board with a sample of the upcoming 40 pin variant of the CC2651R3 (CC2651R31T0RKP).
I'm trying to port noRTOS examples from the CC26x2R1 launchpad.
Where can I find an example project showing the device config in CCS?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
I have a custom dev board with a sample of the upcoming 40 pin variant of the CC2651R3 (CC2651R31T0RKP).
I'm trying to port noRTOS examples from the CC26x2R1 launchpad.
Where can I find an example project showing the device config in CCS?
Hi ZIJWS,
Please refer to the Running Software Examples on the CC13x1x3 or CC26x1x3 module of any Stack Migration Guide.
The different package variants are binary compatible as long as the software does not access a non-existing IO on the considered package. For the 5x5 package, the available IOs are between IOID_0 and IOID_22.
Regards,
Ryan