This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2652R: Identify cc2652 chip connected to launchpad

Part Number: CC2652R

Hi,

Is there a way to identify the chip connected to launchpad using command line tool. The CLI Device Detector seems to give the launchpad connected rather than the chip connected. 

The Smart RF Studio 7 however tells me which chip is connected, so I understand there should be a way to do this programmatically/cli, please could you share any information about this ?

Thanks
Akhilesh