A customer is trying to run the PERL extension of SmartRF Studio, but met the problem below:
"Cant find boot_dal_ext symbol in ./dal_ext.dll at dal_ext.pm line 11"
There is similar issue reported:
Is this a known issue?
Best regards,
Shuyang
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
A customer is trying to run the PERL extension of SmartRF Studio, but met the problem below:
"Cant find boot_dal_ext symbol in ./dal_ext.dll at dal_ext.pm line 11"
There is similar issue reported:
Is this a known issue?
Best regards,
Shuyang
Hello Shuyang,
As mentioned in the other E2E threads, the SmartRF Studio PERL scripts are not maintained or supported on Windows 10. The customer should reference a different solution for their needs.
Regards,
Ryan
Hi Ryan,
It it also can not run on Windows7,as follows.How can I use the SmartRF Studio PERL scripts which automatic generation by smartrftm_studio-2.28.0.zip.
Regards,
huasheng Liu
Hi huasheng,
There appear to be some prerequisites and installation instructions: https://software-dl.ti.com/lprf/smartrftm_studio/docs/help/html/perl.html
Please refer to this similar E2E thread: https://e2e.ti.com/f/1/t/702630
Regards,
Ryan
Hi Ryan,
I have tried all these methods on E2E , and they are the same phenomenon.We can't run the scripts.
Can you help me to try to run the scripts on your computer?
I will ask the Tools Team to comment and provide a response within 24 hours.
Regards,
Ryan
Tool Team's response:
Unfortunately the Perl scripting only support the 8051 MCUs and the legacy Transceivers. See description of the Test Environment that can be found on the Tools menu in the Startup Window. For the ARM based wireless MCUs the only test environment that is provided is the Radio Test Library (RTLib).
Regards,
Ryan