Is it possible to use CC2530EMK to program ZStack firmware to make the EMK module work as Zigbee HA device ?

Noppamas Keawmoraraungrit

Other Parts Discussed in Thread: CC2530, CC2530EMK

we have some question for TI's Zigbee p/n "CC2530" as below detail.

we looking for solution to develop Zigbee HA device that can work with our Zigbee HA Gateway.

Is it possible to use CC2530EMK to program ZStack firmware to make the EMK module work as Zigbee HA device?

http://www.ti.com/tool/cc2530emk

Thank you.

Regards,

Duanpen Z.

over 11 years ago

0 YiKai Chen over 11 years ago

Guru 735455 points

Of course. You can have some HA examples after you install TI ZStack. There are also some other HA examples here.

0 Noppamas Keawmoraraungrit over 11 years ago in reply to YiKai Chen

Intellectual 270 points

Dear YiKai Chen,

Many thank for your help, but we have more question as below.

Which eval/kit that we can try HA? Thank you.

Best Regards,

Duanpen Z.

0 YiKai Chen over 11 years ago in reply to Noppamas Keawmoraraungrit

Guru 735455 points

Hi, CC2530 ZDK is my suggestion.

0 Noppamas Keawmoraraungrit over 11 years ago in reply to YiKai Chen

Intellectual 270 points

Dear MR.YiKai Chen,

The CC2530EMK is the same as CC2530 ZDK ?

Thank you.

Best Regards,

Duanpen Z.

0 YiKai Chen over 11 years ago in reply to Noppamas Keawmoraraungrit

Guru 735455 points

Yes, they should be the same.

0 Noppamas Keawmoraraungrit over 11 years ago in reply to YiKai Chen

Intellectual 270 points

Dear YiKai Chen,

Thank you very much for your help.

Best regards,

Duanpen Z.

Zigbee & Thread

Zigbee & Thread forum

Is it possible to use CC2530EMK to program ZStack firmware to make the EMK module work as Zigbee HA device ?