Zstack Differences

Pinky Patel

Other Parts Discussed in Thread: CC2538, CC2530, Z-STACK

Hi,

I have used Zstack 2.5.1a and CC2530 Device. I have seen the New Stack in ti called ZStack Mesh 1.0, in that about 400 nodes can be connected. Now i am using CC2538.

->I want to know the Difference between ZStack Mesh 1.0 and Zstack Home 1.2.0. which is good to use in CC2538.

->Can CC2530 End device(Zstack 2.5.1a HA Profile) talk to CC2538 Coordinator or Router(Zstack Home 1.2 or Zstack Mesh 1.0).

over 11 years ago

0 YiKai Chen over 11 years ago

Guru 735695 points

1. Z-Stack Home 1.2.0 is based on Zigbee HA profile and Z-Stack Mesh 1.0.0 is no profile specific. If you dedicate to HA profile, you should use Z-Stack Home 1.2.0. If you would use private profile, you can stick to Z-Stack Mesh.

2. ZED of Z-Stack 2.5.1a HA profile is no problem to talk to CC2538 that runs Z-Stack Home 1.2.0 but it won't work with Z-Stack Mesh.

0 Pinky Patel over 11 years ago in reply to YiKai Chen

Intellectual 280 points

Is any other pros and cons of using Zstack Home 1.2 and Zstack Mesh 1.0.

0 YiKai Chen over 11 years ago in reply to Pinky Patel

Guru 735695 points

Basically, Z-Stack Home 1.2.0 and Z-Stack Mesh 1.0 share the same Zigbee Pro library provided by TI. There is no pros and cons. It only depends on your application.

Zigbee & Thread

Zigbee & Thread forum

Zstack Differences