How can I use CC2531 as ZigBee coordinator

I've made some progress :)

here is the sniffer file:

sniffer4.zip

But now every time i'm connected to coordinator the device shows up "XDS reported an error: Unknown CPU Status and then it went down.

I changed this for testing to 0xFF:

/**
 * Define the default Extended PAN ID.
 *
 * Setting this to a value other than all 0xFF causes
 * ZDO_COORD to use this value as its extended PAN ID and
 * Routers and end devices to join extended PAN with this ID
 */
#if !defined( ZNWK_CONFIG_EXTENDED_PAN_ID )
  #define ZNWK_CONFIG_EXTENDED_PAN_ID {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}
#endif

But 0x00 will work.

Do you know something about my Problem? Everytime the device connects with the Coordinator it shut down with error: "XDS reported an error: Unknown CPU Status"

And the temperature sensor sends only temperature to coordinator but I also Need to get some Data from the Coordinator how can I implement something like this ?

snifferError.zip

No, I don't see similar issue. Just test with my CC2650 LaunchPad and everything works fine.

Ok I used the wrong bios, now it don't shut down it do the Data polling and then all led turn off. Then I press btn1 (want to send temperature ) but it don't send something.

sniffer5.zip

I'm not using Sample Switch I:m using ThermostatTemperatureSensor example for End Device

/******************************************************************************
 * @fn      TempSensor_handleKeys
 *
 * @brief   Callback service for keys
 *
 * @param   keys  - keys that were pressed
 *
 * @return  void
 */
static void TempSensor_handleKeys(uint8_t keys)
{
    if(keys == KEY_LEFT) // LP BTN-1
    {
        // increase temperature
        giTsScreenMode = TEMPSENSOR_MAINMODE;

        TempSensor_changeTemp(true);

    }

    if(keys == KEY_RIGHT) // LP BTN-2
    {
        // Start EZMode Commissioning
        if( (giTsScreenMode == TEMPSENSOR_MAINMODE) ||
            (giTsScreenMode == TEMPSENSOR_HELPMODE) )
        {
            giTsScreenMode = TEMPSENSOR_MAINMODE;

            TempSensor_startEzMode();
        }
    }

You mean this yes it hits and it starts the EZMode

Hi you don't use the CC2531 as Coordinator ?

Are you shure that I can use the CC2531 as Coordinator? Maybe there is something wrong in Coordinator because sometimes i debug and the Buttons don't work then I restart debugging and the Buttons work. Maybe something in the config is wrong ? Do I have to include something extra for CC2531?

Ok now I press btn 2 both LED are on then press btn on Coordinator only red Light is on. I think that shows that they are connected ?  but I can't see that I send some data or do I look at the wrong Thing ?

sniffer6.zip

Yes I do and now it work xD  I have implemented a SPI and tested it before but now the SPI don't work any more and because of this it don't send before but now sending works xD

Do you have any idea why the SPI don't work anymore ?

ANd can you tell me which Data is send by the End Device I know it is the temperature but it is: 8a:d0:77:67:8f:e8:40:7a:ec:23:35:52:6e:c5:aa:4c what are those numbers for ?

Best regards and big thank you for your help xD

Ok you were to fast ;) I've edit the comment above