RTOS/LAUNCHXL-CC2650: Using System_printf over UART on IAR console

Krushna.mukharjee

Tool/software: TI-RTOS

Dear all,

I'm working with CC2650-Launchpad. I am using sample switch from Zstack as a sample demo. I want to use the system_printf over UART protocol to see the output on a console window. Can anyone please guide me on how to implement this in this application.?

over 7 years ago

0 YiKai Chen over 7 years ago

Guru 735695 points

Try to refer to sunmaysky.blogspot.tw/.../steps-for-ti-cc26xx-ble-stack.html

0 Krushna.mukharjee over 7 years ago in reply to YiKai Chen

Intellectual 680 points

Dear YK Chen,

Thanks for your reply.
I am using zigbee stack for the applications and using IAR embedded workbench.
Would be really helpful for me if you can help me with sample switch application. Which config file I need to change?

0 YiKai Chen over 7 years ago in reply to Krushna.mukharjee

Guru 735695 points

You can revise app.cfg under SampleSwitch->Config instead of appBLE.cfg.

0 Krushna.mukharjee over 7 years ago in reply to YiKai Chen

Intellectual 680 points

Thanks YK chen!. It works as suggested. :)

Zigbee & Thread

Zigbee & Thread forum

RTOS/LAUNCHXL-CC2650: Using System_printf over UART on IAR console